mainwindow.cpp Example File

mainwindows/sdi/mainwindow.cpp
/**************************************************************************** ** ** Copyright (C) 2016 The Qt Company Ltd. ** Contact: https://www.qt.io/licensing/ ** ** This file is part of the examples of the Qt Toolkit. ** ** $QT_BEGIN_LICENSE:BSD$ ** Commercial License Usage ** Licensees holding valid commercial Qt licenses may use this file in ** accordance with the commercial license agreement provided with the ** Software or, alternatively, in accordance with the terms contained in ** a written agreement between you and The Qt Company. For licensing terms ** and conditions see https://www.qt.io/terms-conditions. For further ** information use the contact form at https://www.qt.io/contact-us. ** ** BSD License Usage ** Alternatively, you may use this file under the terms of the BSD license ** as follows: ** ** "Redistribution and use in source and binary forms, with or without ** modification, are permitted provided that the following conditions are ** met: ** * Redistributions of source code must retain the above copyright ** notice, this list of conditions and the following disclaimer. ** * Redistributions in binary form must reproduce the above copyright ** notice, this list of conditions and the following disclaimer in ** the documentation and/or other materials provided with the ** distribution. ** * Neither the name of The Qt Company Ltd nor the names of its ** contributors may be used to endorse or promote products derived ** from this software without specific prior written permission. ** ** ** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT ** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR ** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT ** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, ** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT ** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, ** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY ** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE ** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." ** ** $QT_END_LICENSE$ ** ****************************************************************************/
#include <QtWidgets> #include "mainwindow.h" MainWindow::MainWindow() { init(); setCurrentFile(QString()); } MainWindow::MainWindow(const QString &fileName) { init(); loadFile(fileName); } void MainWindow::closeEvent(QCloseEvent *event) { if (maybeSave()) { writeSettings(); event->accept(); } else { event->ignore(); } } void MainWindow::newFile() { MainWindow *other = new MainWindow; other->tile(this); other->show(); } void MainWindow::open() { const QString fileName = QFileDialog::getOpenFileName(this); if (!fileName.isEmpty()) openFile(fileName); } void MainWindow::openFile(const QString &fileName) { MainWindow *existing = findMainWindow(fileName); if (existing) { existing->show(); existing->raise(); existing->activateWindow(); return; } if (isUntitled && textEdit->document()->isEmpty() && !isWindowModified()) { loadFile(fileName); return; } MainWindow *other = new MainWindow(fileName); if (other->isUntitled) { delete other; return; } other->tile(this); other->show(); } bool MainWindow::save() { return isUntitled ? saveAs() : saveFile(curFile); } bool MainWindow::saveAs() { QString fileName = QFileDialog::getSaveFileName(this, tr("Save As"), curFile); if (fileName.isEmpty()) return false; return saveFile(fileName); } void MainWindow::about() { QMessageBox::about(this, tr("About SDI"), tr("The <b>SDI</b> example demonstrates how to write single " "document interface applications using Qt.")); } void MainWindow::documentWasModified() { setWindowModified(true); } void MainWindow::init() { setAttribute(Qt::WA_DeleteOnClose); isUntitled = true; textEdit = new QTextEdit; setCentralWidget(textEdit); createActions(); createStatusBar(); readSettings(); connect(textEdit->document(), &QTextDocument::contentsChanged, this, &MainWindow::documentWasModified); setUnifiedTitleAndToolBarOnMac(true); } void MainWindow::tile(const QMainWindow *previous) { if (!previous) return; int topFrameWidth = previous->geometry().top() - previous->pos().y(); if (!topFrameWidth) topFrameWidth = 40; const QPoint pos = previous->pos() + 2 * QPoint(topFrameWidth, topFrameWidth); if (QApplication::desktop()->availableGeometry(this).contains(rect().bottomRight() + pos)) move(pos); } void MainWindow::createActions() { QMenu *fileMenu = menuBar()->addMenu(tr("&File")); QToolBar *fileToolBar = addToolBar(tr("File")); const QIcon newIcon = QIcon::fromTheme("document-new", QIcon(":/images/new.png")); QAction *newAct = new QAction(newIcon, tr("&New"), this); newAct->setShortcuts(QKeySequence::New); newAct->setStatusTip(tr("Create a new file")); connect(newAct, &QAction::triggered, this, &MainWindow::newFile); fileMenu->addAction(newAct); fileToolBar->addAction(newAct); const QIcon openIcon = QIcon::fromTheme("document-open", QIcon(":/images/open.png")); QAction *openAct = new QAction(openIcon, tr("&Open..."), this); openAct->setShortcuts(QKeySequence::Open); openAct->setStatusTip(tr("Open an existing file")); connect(openAct, &QAction::triggered, this, &MainWindow::open); fileMenu->addAction(openAct); fileToolBar->addAction(openAct); const QIcon saveIcon = QIcon::fromTheme("document-save", QIcon(":/images/save.png")); QAction *saveAct = new QAction(saveIcon, tr("&Save"), this); saveAct->setShortcuts(QKeySequence::Save); saveAct->setStatusTip(tr("Save the document to disk")); connect(saveAct, &QAction::triggered, this, &MainWindow::save); fileMenu->addAction(saveAct); fileToolBar->addAction(saveAct); const QIcon saveAsIcon = QIcon::fromTheme("document-save-as"); QAction *saveAsAct = fileMenu->addAction(saveAsIcon, tr("Save &As..."), this, &MainWindow::saveAs); saveAsAct->setShortcuts(QKeySequence::SaveAs); saveAsAct->setStatusTip(tr("Save the document under a new name")); fileMenu->addSeparator(); QMenu *recentMenu = fileMenu->addMenu(tr("Recent...")); connect(recentMenu, &QMenu::aboutToShow, this, &MainWindow::updateRecentFileActions); recentFileSubMenuAct = recentMenu->menuAction(); for (int i = 0; i < MaxRecentFiles; ++i) { recentFileActs[i] = recentMenu->addAction(QString(), this, &MainWindow::openRecentFile); recentFileActs[i]->setVisible(false); } recentFileSeparator = fileMenu->addSeparator(); setRecentFilesVisible(MainWindow::hasRecentFiles()); QAction *closeAct = fileMenu->addAction(tr("&Close"), this, &QWidget::close); closeAct->setShortcut(tr("Ctrl+W")); closeAct->setStatusTip(tr("Close this window")); const QIcon exitIcon = QIcon::fromTheme("application-exit"); QAction *exitAct = fileMenu->addAction(exitIcon, tr("E&xit"), qApp, &QApplication::closeAllWindows); exitAct->setShortcuts(QKeySequence::Quit); exitAct->setStatusTip(tr("Exit the application")); QMenu *editMenu = menuBar()->addMenu(tr("&Edit")); QToolBar *editToolBar = addToolBar(tr("Edit")); #ifndef QT_NO_CLIPBOARD const QIcon cutIcon = QIcon::fromTheme("edit-cut", QIcon(":/images/cut.png")); QAction *cutAct = new QAction(cutIcon, tr("Cu&t"), this); cutAct->setShortcuts(QKeySequence::Cut); cutAct->setStatusTip(tr("Cut the current selection's contents to the " "clipboard")); connect(cutAct, &QAction::triggered, textEdit, &QTextEdit::cut); editMenu->addAction(cutAct); editToolBar->addAction(cutAct); const QIcon copyIcon = QIcon::fromTheme("edit-copy", QIcon(":/images/copy.png")); QAction *copyAct = new QAction(copyIcon, tr("&Copy"), this); copyAct->setShortcuts(QKeySequence::Copy); copyAct->setStatusTip(tr("Copy the current selection's contents to the " "clipboard")); connect(copyAct, &QAction::triggered, textEdit, &QTextEdit::copy); editMenu->addAction(copyAct); editToolBar->addAction(copyAct); const QIcon pasteIcon = QIcon::fromTheme("edit-paste", QIcon(":/images/paste.png")); QAction *pasteAct = new QAction(pasteIcon, tr("&Paste"), this); pasteAct->setShortcuts(QKeySequence::Paste); pasteAct->setStatusTip(tr("Paste the clipboard's contents into the current " "selection")); connect(pasteAct, &QAction::triggered, textEdit, &QTextEdit::paste); editMenu->addAction(pasteAct); editToolBar->addAction(pasteAct); menuBar()->addSeparator(); #endif // !QT_NO_CLIPBOARD QMenu *helpMenu = menuBar()->addMenu(tr("&Help")); QAction *aboutAct = helpMenu->addAction(tr("&About"), this, &MainWindow::about); aboutAct->setStatusTip(tr("Show the application's About box")); QAction *aboutQtAct = helpMenu->addAction(tr("About &Qt"), qApp, &QApplication::aboutQt); aboutQtAct->setStatusTip(tr("Show the Qt library's About box")); #ifndef QT_NO_CLIPBOARD cutAct->setEnabled(false); copyAct->setEnabled(false); connect(textEdit, &QTextEdit::copyAvailable, cutAct, &QAction::setEnabled); connect(textEdit, &QTextEdit::copyAvailable, copyAct, &QAction::setEnabled); #endif // !QT_NO_CLIPBOARD } void MainWindow::createStatusBar() { statusBar()->showMessage(tr("Ready")); } void MainWindow::readSettings() { QSettings settings(QCoreApplication::organizationName(), QCoreApplication::applicationName()); const QByteArray geometry = settings.value("geometry", QByteArray()).toByteArray(); if (geometry.isEmpty()) { const QRect availableGeometry = QApplication::desktop()->availableGeometry(this); resize(availableGeometry.width() / 3, availableGeometry.height() / 2); move((availableGeometry.width() - width()) / 2, (availableGeometry.height() - height()) / 2); } else { restoreGeometry(geometry); } } void MainWindow::writeSettings() { QSettings settings(QCoreApplication::organizationName(), QCoreApplication::applicationName()); settings.setValue("geometry", saveGeometry()); } bool MainWindow::maybeSave() { if (!textEdit->document()->isModified()) return true; const QMessageBox::StandardButton ret = QMessageBox::warning(this, tr("SDI"), tr("The document has been modified.\n" "Do you want to save your changes?"), QMessageBox::Save | QMessageBox::Discard | QMessageBox::Cancel); switch (ret) { case QMessageBox::Save: return save(); case QMessageBox::Cancel: return false; default: break; } return true; } void MainWindow::loadFile(const QString &fileName) { QFile file(fileName); if (!file.open(QFile::ReadOnly | QFile::Text)) { QMessageBox::warning(this, tr("SDI"), tr("Cannot read file %1:\n%2.") .arg(QDir::toNativeSeparators(fileName), file.errorString())); return; } QTextStream in(&file); QApplication::setOverrideCursor(Qt::WaitCursor); textEdit->setPlainText(in.readAll()); QApplication::restoreOverrideCursor(); setCurrentFile(fileName); statusBar()->showMessage(tr("File loaded"), 2000); } void MainWindow::setRecentFilesVisible(bool visible) { recentFileSubMenuAct->setVisible(visible); recentFileSeparator->setVisible(visible); } static inline QString recentFilesKey() { return QStringLiteral("recentFileList"); } static inline QString fileKey() { return QStringLiteral("file"); } static QStringList readRecentFiles(QSettings &settings) { QStringList result; const int count = settings.beginReadArray(recentFilesKey()); for (int i = 0; i < count; ++i) { settings.setArrayIndex(i); result.append(settings.value(fileKey()).toString()); } settings.endArray(); return result; } static void writeRecentFiles(const QStringList &files, QSettings &settings) { const int count = files.size(); settings.beginWriteArray(recentFilesKey()); for (int i = 0; i < count; ++i) { settings.setArrayIndex(i); settings.setValue(fileKey(), files.at(i)); } settings.endArray(); } bool MainWindow::hasRecentFiles() { QSettings settings(QCoreApplication::organizationName(), QCoreApplication::applicationName()); const int count = settings.beginReadArray(recentFilesKey()); settings.endArray(); return count > 0; } void MainWindow::prependToRecentFiles(const QString &fileName) { QSettings settings(QCoreApplication::organizationName(), QCoreApplication::applicationName()); const QStringList oldRecentFiles = readRecentFiles(settings); QStringList recentFiles = oldRecentFiles; recentFiles.removeAll(fileName); recentFiles.prepend(fileName); if (oldRecentFiles != recentFiles) writeRecentFiles(recentFiles, settings); setRecentFilesVisible(!recentFiles.isEmpty()); } void MainWindow::updateRecentFileActions() { QSettings settings(QCoreApplication::organizationName(), QCoreApplication::applicationName()); const QStringList recentFiles = readRecentFiles(settings); const int count = qMin(int(MaxRecentFiles), recentFiles.size()); int i = 0; for ( ; i < count; ++i) { const QString fileName = MainWindow::strippedName(recentFiles.at(i)); recentFileActs[i]->setText(tr("&%1 %2").arg(i + 1).arg(fileName)); recentFileActs[i]->setData(recentFiles.at(i)); recentFileActs[i]->setVisible(true); } for ( ; i < MaxRecentFiles; ++i) recentFileActs[i]->setVisible(false); } void MainWindow::openRecentFile() { if (const QAction *action = qobject_cast<const QAction *>(sender())) openFile(action->data().toString()); } bool MainWindow::saveFile(const QString &fileName) { QFile file(fileName); if (!file.open(QFile::WriteOnly | QFile::Text)) { QMessageBox::warning(this, tr("SDI"), tr("Cannot write file %1:\n%2.") .arg(QDir::toNativeSeparators(fileName), file.errorString())); return false; } QTextStream out(&file); QApplication::setOverrideCursor(Qt::WaitCursor); out << textEdit->toPlainText(); QApplication::restoreOverrideCursor(); setCurrentFile(fileName); statusBar()->showMessage(tr("File saved"), 2000); return true; } void MainWindow::setCurrentFile(const QString &fileName) { static int sequenceNumber = 1; isUntitled = fileName.isEmpty(); if (isUntitled) { curFile = tr("document%1.txt").arg(sequenceNumber++); } else { curFile = QFileInfo(fileName).canonicalFilePath(); } textEdit->document()->setModified(false); setWindowModified(false); if (!isUntitled && windowFilePath() != curFile) MainWindow::prependToRecentFiles(curFile); setWindowFilePath(curFile); } QString MainWindow::strippedName(const QString &fullFileName) { return QFileInfo(fullFileName).fileName(); } MainWindow *MainWindow::findMainWindow(const QString &fileName) const { QString canonicalFilePath = QFileInfo(fileName).canonicalFilePath(); foreach (QWidget *widget, QApplication::topLevelWidgets()) { MainWindow *mainWin = qobject_cast<MainWindow *>(widget); if (mainWin && mainWin->curFile == canonicalFilePath) return mainWin; } return 0; }

© 2020 The Qt Company Ltd. Documentation contributions included herein are the copyrights of their respective owners. The documentation provided herein is licensed under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation. Qt and respective logos are trademarks of The Qt Company Ltd. in Finland and/or other countries worldwide. All other trademarks are property of their respective owners.