Qt for WinRT
Qt for WinRT allows you to run Qt applications on devices supporting the Windows Store App APIs. This covers Modern UI applications on Windows 10, Windows 10 Mobile and Windows 10 IoT.
Development for Windows Runtime requires a Microsoft Windows development host. The minimum version supported is Windows 10.
Depending on your device target you will need the following tools provided by Microsoft to be installed:
|Windows 10 Mobile||Visual Studio 2015|
|Windows 10 Desktop||Visual Studio 2015|
|Windows 10 IoT||Visual Studio 2015|
|XBox One||Visual Studio 2015|
If you are targeting a remote device, please follow all instructions by Visual Studio to set it up correctly.
As WinRT applications run in a sandboxed environment, some restrictions should be taken into account when considering porting or writing cross-platform applications:
- The class QProcess is not implemented (indicated by the macro
QT_NO_PROCESSbeing defined) as no subprocesses can be launched.
- Some paths returned by QStandardPaths::writableLocation() may be empty.
- A WinRT application may not do socket-based communication with another application running on the same host (as this would violate the sandboxing).
- Applications run in fullscreen mode only (see QStyleHints). On desktop, the screen size varies as the application is resized.
- There are no environment variables. Qt emulates the functionality by maintaining the values locally, so that qputenv() and related functions continue to work. All known variables influencing Qt can be set in source code.
- WinRT applications are UI applications by nature. This implies that console type applications will have a window created internally, which is always visible.
- Applications should not exit programmatically. In particular, calling exit() before the UI is shown causes a crash.
- The WinRT clipboard is local to the application; it cannot be retrieved by a desktop application.
You can develop applications for WinRT just as any other Qt applications. Use your favorite editor or IDE (such as Qt Creator) and create your application or load a Qt example. Then run
nmake/jom to build your application.
To launch your project with Visual Studio a corresponding project needs to be created.
qmake supports converting a
.pro project into Visual Studio format by passing the parameters
qmake -tp vc <your project>.pro
Be aware of using the correct match of
qmake and Visual Studio. As the Visual Studio format is generic, it does not return an immediate error if for instance you open a Windows Phone project inside Visual Studio for Windows.
This creates a project which supports building applications and running them with Visual Studio. It does not embed Qt libraries into the package and requires you to add them manually. For this purpose, the command line tool windeployqt has been included in the installed package. To enable automatic parsing of dependencies and adding the libraries and dependencies into the application package, create the project with the following options:
qmake -tp vc <your project>.pro "CONFIG+=windeployqt"
You will not need to do any conversion to open your project in Qt Creator. Please follow the generic instructions on how to open and build a project.
Qt Creator deploys your application on the WinRT device, if the device is detected by the PC.
Note: Remote PCs, such as the Surface, are not yet supported for deployment by Creator.
We assume that you have cloned the Qt 5 repositories (or obtained the Qt sources elsewhere) and followed the platform-independent requirements for building Qt. The process of building Qt is found in the Building Qt Sources page.
Qt for WinRT is always built as a cross-build, because tools, such as qmake, are built as desktop applications. For compiling those, a desktop development environment is required. If you have installed Visual Studio 2013 for Windows, this will only create binaries for WinRT. You will need Visual Studio for Windows Desktop as well to create those desktop tools.
Please make sure to use an x86 command prompt (either use the VS x86 Native Tools Command Prompt or call vcvarsall.bat without any parameter or with
x86) for every WinRT build. While the toolchain which is used for the target is set automatically, the command prompt decides what will be used for the host tools like qmake or moc. Building these tools might fail if another command prompt is used.
> ./configure -xplatform winrt-x64-msvc2013 -release > nmake/jom
WinRT applications must be packaged (including all dependencies) and installed or registered with the application service in order to be launched. The WinRT Runner Tool can be used to launch these applications from the command line.
Package content consists of the application executable and its dependencies, as for every Windows application. The dependencies are the needed (Qt) libraries and plugins. Note that Qt plugins have to be put into a folder named after their category (platforms, imageformats, and so on) without using a
plugins folder as root. For more information, see Qt for Windows - Deployment.
As WinRT applications are run in a sandboxed environment, setting the path variable to point to the files required will not work.
The windeployqt convenience tool looks up the application's dependencies and copies Qt libraries and plugins to the appropriate directories, as necessary.
Because all resources are placed to one directory, you can register the directory using an XML file (AppxManifest.xml) and Windows Powershell. The reference for these manifest files can be found here. The target processor architecture must be specified (as opposed to the default, 'neutral'). As soon as these requirements are met, change into your packaged directory in PowerShell and call:
> Add-AppxPackage -Register AppxManifest.xml
Note: The WinRT Runner Tool can perform the same operation with the --install option.
If that worked, you should be able to find your application in Windows' start screen. To remove your application, use Windows' built-in way to uninstall applications (right-click or tap and hold the application and choose
Note: The WinRT Runner Tool can perform the same operation with the --remove option.
The WinRT Runner Tool can be found in QTDIR/bin/winrtrunner. It is intended to aid in the deployment, launching, and debugging of Qt for WinRT applications. It can be used from the command line, or invoked by the IDE.
Usage: winrtrunner.exe [options] package [arguments] winrtrunner installs, runs, and collects test results for packages made with Qt. Options: --test Installs, starts, collects output, stops (if needed), and uninstalls the package. This is the default action of winrtrunner. --start Starts the package. The package is installed if it is not already installed. Pass --install to force reinstallation. --debug <debugger> Starts the package with the debugger attached. The package is installed if it is not already installed. Pass --install to force reinstallation. --debugger-arguments <arguments> Sets the arguments to be passed to the debugger when --debug is used. If no debugger was provided, this option is ignored. --suspend Suspends a running package. When combined with --stop or --test, the app will be suspended before being terminated. --stop Terminates a running package. Can be be combined with --start and --suspend. --wait <seconds> If the package is running, waits the given number of seconds before continuing to the next task. Passing 0 causes the runner to wait indefinitely. --install (Re)installs the package. --remove Uninstalls the package. --device <name|index> Specifies the device to target as a device name or index. Use --list-devices to find available devices. The default device is the first device found for the active run profile. --profile <name> Forces a particular run profile. --list-devices Lists the available devices (for use with --device). --verbose <level> Sets the verbosity level of the message output (0 - silent, 1 - info, 2 - debug). Defaults to 1. --ignore-errors Always exits with code 0, regardless of the error state. -?, -h, --help Displays this help. Arguments: package [arguments] The executable or package manifest to act upon. Arguments after the package name will be passed to the application when it starts.
© 2019 The Qt Company Ltd. Documentation contributions included herein are the copyrights of their respective owners. The documentation provided herein is licensed under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation. Qt and respective logos are trademarks of The Qt Company Ltd. in Finland and/or other countries worldwide. All other trademarks are property of their respective owners.