QFileDevice Class

The QFileDevice class provides an interface for reading from and writing to open files. More...

Header: #include <QFileDevice>
qmake: QT += core
Since: Qt 5.0
Inherits: QIODevice
Inherited By:

QFile and QSaveFile

This class was introduced in Qt 5.0.

Note: All functions in this class are reentrant.

Public Types

enum FileError { NoError, ReadError, WriteError, FatalError, ResourceError, …, CopyError }
enum FileHandleFlag { AutoCloseHandle, DontCloseHandle }
flags FileHandleFlags
enum FileTime { FileAccessTime, FileBirthTime, FileMetadataChangeTime, FileModificationTime }
enum MemoryMapFlags { NoOptions, MapPrivateOption }
enum Permission { ReadOwner, WriteOwner, ExeOwner, ReadUser, WriteUser, …, ExeOther }
flags Permissions

Public Functions

virtual ~QFileDevice()
QFileDevice::FileError error() const
virtual QString fileName() const
QDateTime fileTime(QFileDevice::FileTime time) const
bool flush()
int handle() const
uchar *map(qint64 offset, qint64 size, QFileDevice::MemoryMapFlags flags = NoOptions)
virtual QFileDevice::Permissions permissions() const
virtual bool resize(qint64 sz)
bool setFileTime(const QDateTime &newDate, QFileDevice::FileTime fileTime)
virtual bool setPermissions(QFileDevice::Permissions permissions)
bool unmap(uchar *address)
void unsetError()

Reimplemented Public Functions

virtual bool atEnd() const override
virtual void close() override
virtual bool isSequential() const override
virtual qint64 pos() const override
virtual bool seek(qint64 pos) override
virtual qint64 size() const override

Reimplemented Protected Functions

virtual qint64 readData(char *data, qint64 len) override
virtual qint64 readLineData(char *data, qint64 maxlen) override
virtual qint64 writeData(const char *data, qint64 len) override

Detailed Description

QFileDevice is the base class for I/O devices that can read and write text and binary files and resources. QFile offers the main functionality, QFileDevice serves as a base class for sharing functionality with other file devices such as QTemporaryFile, by providing all the operations that can be done on files that have been opened by QFile or QTemporaryFile.

See also QFile and QTemporaryFile.

Member Type Documentation

enum QFileDevice::FileError

This enum describes the errors that may be returned by the error() function.

ConstantValueDescription
QFileDevice::NoError0No error occurred.
QFileDevice::ReadError1An error occurred when reading from the file.
QFileDevice::WriteError2An error occurred when writing to the file.
QFileDevice::FatalError3A fatal error occurred.
QFileDevice::ResourceError4Out of resources (e.g., too many open files, out of memory, etc.)
QFileDevice::OpenError5The file could not be opened.
QFileDevice::AbortError6The operation was aborted.
QFileDevice::TimeOutError7A timeout occurred.
QFileDevice::UnspecifiedError8An unspecified error occurred.
QFileDevice::RemoveError9The file could not be removed.
QFileDevice::RenameError10The file could not be renamed.
QFileDevice::PositionError11The position in the file could not be changed.
QFileDevice::ResizeError12The file could not be resized.
QFileDevice::PermissionsError13The file could not be accessed.
QFileDevice::CopyError14The file could not be copied.

enum QFileDevice::FileHandleFlag
flags QFileDevice::FileHandleFlags

This enum is used when opening a file to specify additional options which only apply to files and not to a generic QIODevice.

ConstantValueDescription
QFileDevice::AutoCloseHandle0x0001The file handle passed into open() should be closed by close(), the default behavior is that close just flushes the file and the application is responsible for closing the file handle. When opening a file by name, this flag is ignored as Qt always owns the file handle and must close it.
QFileDevice::DontCloseHandle0If not explicitly closed, the underlying file handle is left open when the QFile object is destroyed.

The FileHandleFlags type is a typedef for QFlags<FileHandleFlag>. It stores an OR combination of FileHandleFlag values.

enum QFileDevice::FileTime

This enum is used by the fileTime() and setFileTime() functions.

ConstantValueDescription
QFileDevice::FileAccessTime0When the file was most recently accessed (e.g. read or written to).
QFileDevice::FileBirthTime1When the file was created (may not be not supported on UNIX).
QFileDevice::FileMetadataChangeTime2When the file's metadata was last changed.
QFileDevice::FileModificationTime3When the file was most recently modified.

This enum was introduced or modified in Qt 5.10.

See also setFileTime(), fileTime(), and QFileInfo::fileTime().

enum QFileDevice::MemoryMapFlags

This enum describes special options that may be used by the map() function.

ConstantValueDescription
QFileDevice::NoOptions0No options.
QFileDevice::MapPrivateOption0x0001The mapped memory will be private, so any modifications will not be visible to other processes and will not be written to disk. Any such modifications will be lost when the memory is unmapped. It is unspecified whether modifications made to the file made after the mapping is created will be visible through the mapped memory. This enum value was introduced in Qt 5.4.

This enum was introduced or modified in Qt 4.4.

enum QFileDevice::Permission
flags QFileDevice::Permissions

This enum is used by the permission() function to report the permissions and ownership of a file. The values may be OR-ed together to test multiple permissions and ownership values.

ConstantValueDescription
QFileDevice::ReadOwner0x4000The file is readable by the owner of the file.
QFileDevice::WriteOwner0x2000The file is writable by the owner of the file.
QFileDevice::ExeOwner0x1000The file is executable by the owner of the file.
QFileDevice::ReadUser0x0400The file is readable by the user.
QFileDevice::WriteUser0x0200The file is writable by the user.
QFileDevice::ExeUser0x0100The file is executable by the user.
QFileDevice::ReadGroup0x0040The file is readable by the group.
QFileDevice::WriteGroup0x0020The file is writable by the group.
QFileDevice::ExeGroup0x0010The file is executable by the group.
QFileDevice::ReadOther0x0004The file is readable by anyone.
QFileDevice::WriteOther0x0002The file is writable by anyone.
QFileDevice::ExeOther0x0001The file is executable by anyone.

Warning: Because of differences in the platforms supported by Qt, the semantics of ReadUser, WriteUser and ExeUser are platform-dependent: On Unix, the rights of the owner of the file are returned and on Windows the rights of the current user are returned. This behavior might change in a future Qt version.

Note: On NTFS file systems, ownership and permissions checking is disabled by default for performance reasons. To enable it, include the following line:

extern Q_CORE_EXPORT int qt_ntfs_permission_lookup;

Permission checking is then turned on and off by incrementing and decrementing qt_ntfs_permission_lookup by 1.

qt_ntfs_permission_lookup++; // turn checking on
qt_ntfs_permission_lookup--; // turn it off again

Note: Since this is a non-atomic global variable, it is only safe to increment or decrement qt_ntfs_permission_lookup before any threads other than the main thread have started or after every thread other than the main thread has ended.

The Permissions type is a typedef for QFlags<Permission>. It stores an OR combination of Permission values.

Member Function Documentation

[virtual] QFileDevice::~QFileDevice()

Destroys the file device, closing it if necessary.

[override virtual] bool QFileDevice::atEnd() const

Reimplements: QIODevice::atEnd() const.

Returns true if the end of the file has been reached; otherwise returns false.

For regular empty files on Unix (e.g. those in /proc), this function returns true, since the file system reports that the size of such a file is 0. Therefore, you should not depend on atEnd() when reading data from such a file, but rather call read() until no more data can be read.

[override virtual] void QFileDevice::close()

Reimplements: QIODevice::close().

Calls QFileDevice::flush() and closes the file. Errors from flush are ignored.

See also QIODevice::close().

QFileDevice::FileError QFileDevice::error() const

Returns the file error status.

The I/O device status returns an error code. For example, if open() returns false, or a read/write operation returns -1, this function can be called to find out the reason why the operation failed.

See also unsetError().

[virtual] QString QFileDevice::fileName() const

Returns the name of the file. The default implementation in QFileDevice returns a null string.

QDateTime QFileDevice::fileTime(QFileDevice::FileTime time) const

Returns the file time specified by time. If the time cannot be determined return QDateTime() (an invalid date time).

This function was introduced in Qt 5.10.

See also setFileTime(), FileTime, and QDateTime::isValid().

bool QFileDevice::flush()

Flushes any buffered data to the file. Returns true if successful; otherwise returns false.

int QFileDevice::handle() const

Returns the file handle of the file.

This is a small positive integer, suitable for use with C library functions such as fdopen() and fcntl(). On systems that use file descriptors for sockets (i.e. Unix systems, but not Windows) the handle can be used with QSocketNotifier as well.

If the file is not open, or there is an error, handle() returns -1.

See also QSocketNotifier.

[override virtual] bool QFileDevice::isSequential() const

Reimplements: QIODevice::isSequential() const.

Returns true if the file can only be manipulated sequentially; otherwise returns false.

Most files support random-access, but some special files may not.

See also QIODevice::isSequential().

uchar *QFileDevice::map(qint64 offset, qint64 size, QFileDevice::MemoryMapFlags flags = NoOptions)

Maps size bytes of the file into memory starting at offset. A file should be open for a map to succeed but the file does not need to stay open after the memory has been mapped. When the QFile is destroyed or a new file is opened with this object, any maps that have not been unmapped will automatically be unmapped.

The mapping will have the same open mode as the file (read and/or write), except when using MapPrivateOption, in which case it is always possible to write to the mapped memory.

Any mapping options can be passed through flags.

Returns a pointer to the memory or nullptr if there is an error.

See also unmap().

[virtual] QFileDevice::Permissions QFileDevice::permissions() const

Returns the complete OR-ed together combination of QFile::Permission for the file.

See also setPermissions().

[override virtual] qint64 QFileDevice::pos() const

Reimplements: QIODevice::pos() const.

[override virtual protected] qint64 QFileDevice::readData(char *data, qint64 len)

Reimplements: QIODevice::readData(char *data, qint64 maxSize).

[override virtual protected] qint64 QFileDevice::readLineData(char *data, qint64 maxlen)

Reimplements: QIODevice::readLineData(char *data, qint64 maxSize).

[virtual] bool QFileDevice::resize(qint64 sz)

Sets the file size (in bytes) sz. Returns true if the resize succeeds; false otherwise. If sz is larger than the file currently is, the new bytes will be set to 0; if sz is smaller, the file is simply truncated.

Warning: This function can fail if the file doesn't exist.

See also size().

[override virtual] bool QFileDevice::seek(qint64 pos)

Reimplements: QIODevice::seek(qint64 pos).

For random-access devices, this function sets the current position to pos, returning true on success, or false if an error occurred. For sequential devices, the default behavior is to do nothing and return false.

Seeking beyond the end of a file: If the position is beyond the end of a file, then seek() will not immediately extend the file. If a write is performed at this position, then the file will be extended. The content of the file between the previous end of file and the newly written data is UNDEFINED and varies between platforms and file systems.

bool QFileDevice::setFileTime(const QDateTime &newDate, QFileDevice::FileTime fileTime)

Sets the file time specified by fileTime to newDate, returning true if successful; otherwise returns false.

Note: The file must be open to use this function.

This function was introduced in Qt 5.10.

See also fileTime() and FileTime.

[virtual] bool QFileDevice::setPermissions(QFileDevice::Permissions permissions)

Sets the permissions for the file to the permissions specified. Returns true if successful, or false if the permissions cannot be modified.

Warning: This function does not manipulate ACLs, which may limit its effectiveness.

See also permissions().

[override virtual] qint64 QFileDevice::size() const

Reimplements: QIODevice::size() const.

Returns the size of the file.

For regular empty files on Unix (e.g. those in /proc), this function returns 0; the contents of such a file are generated on demand in response to you calling read().

bool QFileDevice::unmap(uchar *address)

Unmaps the memory address.

Returns true if the unmap succeeds; false otherwise.

See also map().

void QFileDevice::unsetError()

Sets the file's error to QFileDevice::NoError.

See also error().

[override virtual protected] qint64 QFileDevice::writeData(const char *data, qint64 len)

Reimplements: QIODevice::writeData(const char *data, qint64 maxSize).

© 2024 The Qt Company Ltd. Documentation contributions included herein are the copyrights of their respective owners. The documentation provided herein is licensed under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation. Qt and respective logos are trademarks of The Qt Company Ltd. in Finland and/or other countries worldwide. All other trademarks are property of their respective owners.