Qt offers all the necessary tools to design, develop, build, and deploy your application onto the target.

This guide describes how to use the GUIs of Qt tools to develop Linux applications on TI Starter Kit (SK) devices. It describes the overall process and provides step-by-step instructions for the following tasks:

• Designing a simple UI using Qt Design Studio.
• Creating a project in Qt Creator and utilizing the ready-made Qt Board Support Package (QBSP) for TI SK devices.
• Building and debugging the project on the target hardware.

Overview

The following figure illustrates the basic concept of the software development process when you're using Qt tools and Boot to Qt Software Stack.

• Development Host is a development computer running Qt tools on Windows, Linux, or macOS.
• Qt tools includes development tools such as Qt Creator and Qt Design Studio, and quality assurance (QA) tools such as Squish.
• QBSP SDK contains a cross-compilation toolchain that is integrated into Qt Creator, and a device image that can be used to boot your device using Boot to Qt Software Stack.
• Target Device is your development target that runs your embedded Linux application.
• Upload and debug an application (via Ethernet, Wi-Fi, or USB). Use Qt Creator to upload and debug your application on the target device.
• Flash a QBSP image represents ways (such as SD card) to install Linux on the target device.

Applicable TI Starter Kit Target Devices

The instructions in this guide apply to the following TI SK target devices:

• SK-AM62
• SK-AM69

Installing Qt

Follow the procedures in this guide to get all the required resources, including Qt Creator and Qt Design Studio.

1. Sign in to Qt Customer Portal to download Qt Online Installer.
2. The installer is available for the following hosts:
   • Linux on ARM
   • Linux x86
   • macOS
   • Windows

   Download the installer package that matches your host.

3. Open the installer.
4. Continue to Installation Folder and select Custom installation.
5. Select Next.
6. In Select Components, select Qt 6.7.3. The required developer and designer tools (such as Qt Creator and Qt Design Studio) are preselected in the installer.
7. Select Next.
8. Continue to Ready to Install and select Install.

Installing Boot to Qt Software Stack Using Qt Maintenance Tool

To install Boot to Qt Software Stack for TI SK-AM62x, do the following:

1. Open Qt Maintenance Tool.
2. Continue to Select Components and open the top-level Boot to Qt Software Stack dropdown menu.
3. Open the correct Qt release -specific Boot to Qt Software Stack dropdown menu.
4. Select TI SK-AM62x.
5. Continue to Ready to Install and select Install.

Installing Boot to Qt on the Target Device

Before you can test your Qt applications on the target device, you must flash the target device with an image containing the Boot to Qt Software Stack. After you have successfully flashed your device, Boot to Qt Demo Launcher appears on the screen when you power on the device.

Flashing Boot to Qt Image to a microSD Card

The Boot to Qt image contains the Boot to Qt Software Stack for the TI SK device. Flash the image to a microSD card as follows:

1. Insert a microSD card into your host PC.
2. Open Qt Creator.
3. Select Tools > Flash Boot to Qt Device.
4. Select Boot to Qt and TI SK version.
5. Select Next.

After you have flashed the image to a microSD card, insert the card into your target HW and turn on your device.

The TI SK device starts with Boot to Qt Demo Launcher application by default. If you want to check the IP address of the device, open Get Started with Boot to Qt via Boot to Qt Demo Launcher. The IP address is shown if the device is connected to an Ethernet or Wi-Fi network, or to the host computer via USB OTG.

Setting Up a Device

A Boot to Qt device can be connected either via USB, Ethernet, or Wi-Fi. The sections below provide instructions on how to set up a device using either USB, Ethernet, or Wi-Fi connectivity.

Setting Up a Device via USB

The target device can be connected to the host via USB On-the-Go (OTG). Once connected via a USB network, the device is automatically added to the Devices in Qt Creator.

The USB access to the target device supports two different USB protocols. The default RNDIS protocol can be used when connecting the target device to either a Linux or Windows host. When you want to connect the target device to a macOS host, you need to change to the CDC-ECM protocol.

For more information on connecting a device via USB, see Setting Up USB Ethernet on Target Device.

Setting Up a Device via Ethernet or Wi-Fi

The target device can be connected to network either via Ethernet or Wi-Fi connectivity. After the target device is connected and has an IP address, you can set it up to Qt Creator with the following steps:

1. Open Qt Creator.
2. Select Edit > Preferences.
3. In the Preferences window:
   1. Select Devices.
   2. Select Add > Boot2Qt Device > Start Wizard.
4. In the Boot2Qt Network Device Setup window:
   1. Enter the Device name.
   2. Enter the Device address (IP address of the TI SK device).
   3. Select Finish.
5. On the Devices tab:
   • Select OK.

Creating an Application UI in Qt Design Studio

You can use Qt Design Studio to create a cross-platform UI, also for embedded Linux applications.

1. Open Qt Design Studio.
2. Select Create Project.
3. In Presets, select General.
   • Name your project (also notice the project path to open it with Qt Creator).
   • Adjust display resolution and orientation to suit your display.
4. Make sure your Target Qt Version matches the version of Qt installed on your machine.
5. Select Create.

Now you can modify your UI as you wish. Once it's ready, select Save All to make sure that you can open your UI project in Qt Creator.

Configuring and Building an Application in Qt Creator

1. Open Qt Creator.
2. Navigate to the project you created with Qt Design Studio.
3. Select CMakeLists.txt to open the project.
4. In the Configure Project window:
   1. Select your TI SK kit.
   2. Select Configure Project.

Finally, select Build > Build Project to build the project you configured.

Running an Application on a Device

After setting up your device, you can upload and start your application on the TI SK device.

1. Open Qt Creator.
2. Select File > Open File or Project.
3. Navigate to the project you configured earlier and select Open.
4. In the Projects window:
   1. Edit the Run Settings if necessary.
   2. Select Run.

Debugging an Application

For more information on using Qt Creator to debug an application, see Debugging.

Using a TI SK Device With QBSP

You can use Qt Maintenance Tool to install the latest Qt and QBSP releases for your TI SK device.

For details on how to customize and build QBSPs from sources, see How to Customize a Boot to Qt Image.

For more information on how to add QBSP support for new hardware, see How to Add Support for New Device.

Troubleshooting

If you have any issues with your TI SK device, such as how to set up boot switches or connect the debug terminal, turn to TI E2E support forum for more information.

For more information on troubleshooting Boot to Qt, see Troubleshooting.