Quick Secure CoAP Client Example

Securing the CoAP client and using it with a Qt Quick user interface.

Quick Secure CoAP Client demonstrates how to create a secure CoAP client and use it in a Qt Quick application.

Note: Qt CoAP does not provide a QML API in its current version. However, you can make the C++ classes of the module available to QML as it is shown in the example.

Running the Example

To run the example application, you first need to set up a secure CoAP server. You can run the example with any secure CoAP server supporting one of the pre-shared key (PSK) or certificate authentication modes. For more information about setting up a secure CoAP server, see Setting Up a Secure CoAP Server.

Creating a Client and Linking It with QML

QmlCoapSecureClient wraps the functionality of QCoapClient to make it available to QML. It also holds the selected security mode and security configuration parameters.

class QmlCoapSecureClient : public QObject
{
    Q_OBJECT

public:
    QmlCoapSecureClient(QObject *parent = nullptr);
    ~QmlCoapSecureClient() override;

    Q_INVOKABLE void setSecurityMode(QtCoap::SecurityMode mode);
    Q_INVOKABLE void sendGetRequest(const QString &host, const QString &path, int port);
    Q_INVOKABLE void setSecurityConfiguration(const QString &preSharedKey, const QString &identity);
    Q_INVOKABLE void setSecurityConfiguration(const QString &localCertificatePath,
                                              const QString &caCertificatePath,
                                              const QString &privateKeyPath);
    Q_INVOKABLE void disconnect();

Q_SIGNALS:
    void finished(const QString &result);

private:
    QCoapClient *m_coapClient;
    QCoapSecurityConfiguration m_configuration;
    QtCoap::SecurityMode m_securityMode;
};

In the main.cpp file, we register the QmlCoapSecureClient class as a QML type:

    qmlRegisterType<QmlCoapSecureClient>("CoapSecureClient", 1, 0, "CoapSecureClient");

We also register the QtCoap namespace, to be able to use it in QML code:

    qmlRegisterUncreatableMetaObject(QtCoap::staticMetaObject, "qtcoap.example.namespace", 1, 0,
                                     "QtCoap", "Access to enums is read-only");

The instance of QCoapClient is created when the user selects or changes the security mode in the UI. The QmlCoapSecureClient::setSecurityMode() method is invoked from the QML code, when one of the security modes is selected:

        ButtonGroup {
            id: securityModeGroup
            onClicked: {
                if (securityModeGroup.checkedButton === preSharedMode)
                    client.setSecurityMode(QtCoap.SecurityMode.PreSharedKey);
                else
                    client.setSecurityMode(QtCoap.SecurityMode.Certificate);
            }
        }

And in the .cpp file:

void QmlCoapSecureClient::setSecurityMode(QtCoap::SecurityMode mode)
{
    // Create a new client, if the security mode has changed
    if (m_coapClient && mode != m_securityMode) {
        delete m_coapClient;
        m_coapClient = nullptr;
    }

    if (!m_coapClient) {
        m_coapClient = new QCoapClient(mode);
        m_securityMode = mode;
    ...

Then we connect the signals of the client, to get notified when a CoAP reply is received or a request has failed:

    ...
        connect(m_coapClient, &QCoapClient::finished, this,
                [this](QCoapReply *reply) {
                    if (!reply)
                        emit finished("Something went wrong, received a null reply");
                    else if (reply->errorReceived() != QtCoap::Error::Ok)
                        emit finished(errorMessage(reply->errorReceived()));
                    else
                        emit finished(reply->message().payload());
                });

        connect(m_coapClient, &QCoapClient::error, this,
                [this](QCoapReply *, QtCoap::Error errorCode) {
                    emit finished(errorMessage(errorCode));
                });
    ...

The QmlCoapSecureClient::finished() signal triggers the onFinished signal handler of CoapSecureClient, which handles the output:

    CoapSecureClient {
        id: client
        onFinished: {
            outputView.text = result;
            statusLabel.text = "";
            disconnectButton.enabled = true;
        }
    }
    ...

Sending a Request

When the user clicks on the Send Request button, we set the security configuration based on the selected security mode and send a GET request:

    ...
        Button {
            id: requestButton
            text: qsTr("Send Request")
            enabled: securityModeGroup.checkState !== Qt.Unchecked

            onClicked: {
                outputView.text = "";
                if (securityModeGroup.checkedButton === preSharedMode)
                    client.setSecurityConfiguration(pskField.text, identityField.text);
                else
                    client.setSecurityConfiguration(localCertificatePicker.selectedFile,
                                                    caCertificatePicker.selectedFile,
                                                    privateKeyPicker.selectedFile);

                client.sendGetRequest(hostComboBox.editText, resourceField.text,
    ...

There are two overloads for the setSecurityConfiguration method. For the PSK mode we simply set the client identity and the pre-shared key:

QmlCoapSecureClient::setSecurityConfiguration(const QString &preSharedKey, const QString &identity)
{
    QCoapSecurityConfiguration configuration;
    configuration.setPreSharedKey(preSharedKey.toUtf8());
    configuration.setPreSharedKeyIdentity(identity.toUtf8());
    m_configuration = configuration;
}

And for X.509 certificates, we read the certificate files and the private key, and set the security configuration:

void QmlCoapSecureClient::setSecurityConfiguration(const QString &localCertificatePath,
                                                   const QString &caCertificatePath,
                                                   const QString &privateKeyPath)
{
    QCoapSecurityConfiguration configuration;

    const auto localCerts =
            QSslCertificate::fromPath(QUrl(localCertificatePath).toLocalFile(), QSsl::Pem,
                                      QSslCertificate::PatternSyntax::FixedString);
    if (localCerts.isEmpty())
        qCWarning(lcCoapClient, "The specified local certificate file is not valid.");
    else
        configuration.setLocalCertificateChain(localCerts.toVector());

    const auto caCerts = QSslCertificate::fromPath(QUrl(caCertificatePath).toLocalFile(), QSsl::Pem,
                                                   QSslCertificate::PatternSyntax::FixedString);
    if (caCerts.isEmpty())
        qCWarning(lcCoapClient, "The specified CA certificate file is not valid.");
    else
        configuration.setCaCertificates(caCerts.toVector());

    QFile privateKey(QUrl(privateKeyPath).toLocalFile());
    if (privateKey.open(QIODevice::ReadOnly)) {
        QCoapPrivateKey key(privateKey.readAll(), QSsl::Ec);
        configuration.setPrivateKey(key);
    } else {
        qCWarning(lcCoapClient) << "Unable to read the specified private key file"
                                << privateKeyPath;
    }
    m_configuration = configuration;
}

After setting the security configuration, the sendGetRequest method sets the request URL and sends a GET request:

void QmlCoapSecureClient::sendGetRequest(const QString &host, const QString &path, int port)
{
    if (!m_coapClient)
        return;

    m_coapClient->setSecurityConfiguration(m_configuration);

    QUrl url;
    url.setHost(host);
    url.setPath(path);
    url.setPort(port);
    m_coapClient->get(url);
}

When sending the first request, a handshake with the CoAP server is performed. After the handshake is successfully done, all the subsequent messages are encrypted, and changing the security configuration after a successful handshake won't have any effect. If you want to change it, or change the host, you need to disconnect first.

void QmlCoapSecureClient::disconnect()
{
    if (m_coapClient)
        m_coapClient->disconnect();
}

This will abort the handshake and close the open sockets.

For the authentication using X.509 certificates, we need to specify the certificate files. The FilePicker component is used for this purpose. It combines a text field and a button for opening a file dialog when the button is pressed:

Item {
    id: filePicker

    property string dialogText
    property alias selectedFile: filePathField.text

    height: addFileButton.height

    FileDialog {
        id: fileDialog
        title: qsTr("Please Choose %1").arg(dialogText)
        folder: StandardPaths.writableLocation(StandardPaths.HomeLocation)
        fileMode: FileDialog.OpenFile
        onAccepted: filePathField.text = fileDialog.file
    }

    RowLayout {
        anchors.fill: parent
        TextField {
            id: filePathField
            placeholderText: qsTr("<%1>").arg(dialogText)
            inputMethodHints: Qt.ImhUrlCharactersOnly
            selectByMouse: true
            Layout.fillWidth: true
        }

        Button {
            id: addFileButton
            text: qsTr("Add %1").arg(dialogText)
            onClicked: fileDialog.open()
        }
    }
}

In the main.qml file FilePicker is instantiated several times for creating input fields for certificates and the private key:

    ...
        FilePicker {
            id: localCertificatePicker
            dialogText: "Local Certificate"
            enabled: securityModeGroup.checkedButton === certificateMode
            Layout.columnSpan: 2
            Layout.fillWidth: true
        }

        FilePicker {
            id: caCertificatePicker
            dialogText: "CA Certificate"
            enabled: securityModeGroup.checkedButton === certificateMode
            Layout.columnSpan: 2
            Layout.fillWidth: true
        }

        FilePicker {
            id: privateKeyPicker
            dialogText: "Private Key"
            enabled: securityModeGroup.checkedButton === certificateMode
            Layout.columnSpan: 2
            Layout.fillWidth: true
        }
    ...

Setting Up a Secure CoAP Server

To run this example, you need to have a secure CoAP server supporting either PSK or Certificate modes (or both). You have the following options:

  • Manually build and run a secure CoAP server using, for example, libcoap, Californium, FreeCoAP, or any other CoAP library which supports DTLS.
  • Use the ready Docker images available at Docker Hub, which build and run the secure CoAP servers suitable for our example. The steps required for using the docker-based CoAP servers are described below.
Setting Up a Server For PSK Mode

The following command pulls the docker container for a secure CoAP server based on Californium plugtest (which is not secure by default) from the Docker Hub and starts it:

docker run --name coap-test-server -d --rm -p 5683:5683/udp -p 5684:5684/udp sokurazy/coap-secure-test-server:californium.1.1.0

The CoAP test server will be reachable on ports 5683 (non-secure) and 5684 (secure). For instructions on retrieving the IP address see Getting The IP Address.

To run the example with this server, you need to set the pre-shared key to secretPSK and the identity to Client_identity.

Setting Up a Server For Certificate Mode

The docker image of the secure server using authentication with X.509 certificates is based on the time server example from the FreeCoAP library. The following command pulls the container from Docker Hub and starts it:

docker run --name coap-time-server -d --rm -p 5684:5684/udp sokurazy/coap-secure-time-sever:freecoap

For instructions on retrieving the IP address see Getting The IP Address. The CoAP test server will be reachable by the retrieved IP address on port 5684 and resource path /time.

To run the example with this server, you need to specify the certificate files required by the server. They are located in the docker container, under /root/certs directory. To copy them to a local directory, use the following command:

docker cp <container_id>:/root/certs <local_directory_path>

For example:

$ docker cp 5e46502df88f:/root/certs ~/

The instructions for getting the container ID are described below.

Getting The IP Address

To find out the IP address of a docker container, first retrieve the container ID by running the docker ps command, which will output something like:

$ docker ps
CONTAINER ID        IMAGE
5e46502df88f        sokurazy/coap-secure-test-server:californium.1.1.0

Then you can obtain the IP address with the following command:

docker inspect <container_id> | grep IPAddress

For example:

$ docker inspect 5e46502df88f | grep IPAddress
...
"IPAddress": "172.17.0.2",
...

Files:

© 2024 The Qt Company Ltd. Documentation contributions included herein are the copyrights of their respective owners. The documentation provided herein is licensed under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation. Qt and respective logos are trademarks of The Qt Company Ltd. in Finland and/or other countries worldwide. All other trademarks are property of their respective owners.