QCursor

The QCursor class provides a mouse cursor with an arbitrary shape. More…

Synopsis

Functions

• def __eq__ (, rhs)

• def __ne__ (, rhs)

• def bitmap ()

• def hotSpot ()

• def mask ()

• def pixmap ()

• def setShape (newShape)

• def shape ()

• def swap (other)

Static functions

• def pos ()

• def pos (screen)

• def setPos (p)

• def setPos (screen, p)

• def setPos (screen, x, y)

• def setPos (x, y)

Detailed Description

This class is mainly used to create mouse cursors that are associated with particular widgets and to get and set the position of the mouse cursor.

Qt has a number of standard cursor shapes, but you can also make custom cursor shapes based on a QBitmap , a mask and a hotspot.

To associate a cursor with a widget, use setCursor() . To associate a cursor with all widgets (normally for a short period of time), use setOverrideCursor() .

To set a cursor shape use setShape() or use the QCursor constructor which takes the shape as argument, or you can use one of the predefined cursors defined in the CursorShape enum.

If you want to create a cursor with your own bitmap, either use the QCursor constructor which takes a bitmap and a mask or the constructor which takes a pixmap as arguments.

To set or get the position of the mouse cursor use the static methods pos() and setPos() .

Note

It is possible to create a QCursor before QGuiApplication , but it is not useful except as a place-holder for a real QCursor created after QGuiApplication . Attempting to use a QCursor that was created before QGuiApplication will result in a crash.

A Note for X11 Users

On X11, Qt supports the Xcursor library, which allows for full color icon themes. The table below shows the cursor name used for each CursorShape value. If a cursor cannot be found using the name shown below, a standard X11 cursor will be used instead. Note: X11 does not provide appropriate cursors for all possible CursorShape values. It is possible that some cursors will be taken from the Xcursor theme, while others will use an internal bitmap cursor.

Shape	CursorShape Value	Cursor Name	Shape	CursorShape Value	Cursor Name
	ArrowCursor	left_ptr		SizeVerCursor	size_ver
	UpArrowCursor	up_arrow		SizeHorCursor	size_hor
	CrossCursor	cross		SizeBDiagCursor	size_bdiag
	IBeamCursor	ibeam		SizeFDiagCursor	size_fdiag
	WaitCursor	wait		SizeAllCursor	size_all
	BusyCursor	left_ptr_watch		SplitVCursor	split_v
	ForbiddenCursor	forbidden		SplitHCursor	split_h
	PointingHandCursor	pointing_hand		OpenHandCursor	openhand
	WhatsThisCursor	whats_this		ClosedHandCursor	closedhand
	DragMoveCursor	dnd-move or move		DragCopyCursor	dnd-copy or copy
	DragLinkCursor	dnd-link or link

See also

QWidget GUI Design Handbook: Cursors

class PySide2.QtGui.QCursor

PySide2.QtGui.QCursor(shape)

PySide2.QtGui.QCursor(bitmap, mask[, hotX=-1[, hotY=-1]])

PySide2.QtGui.QCursor(cursor)

PySide2.QtGui.QCursor(pixmap[, hotX=-1[, hotY=-1]])

param mask:

PySide2.QtGui.QBitmap

param shape:

CursorShape

param hotX:

int

param cursor:

PySide2.QtGui.QCursor

param hotY:

int

param bitmap:

PySide2.QtGui.QBitmap

param pixmap:

PySide2.QtGui.QPixmap

Constructs a cursor with the default arrow shape.

Constructs a cursor with the specified shape .

See CursorShape for a list of shapes.

See also

setShape()

Constructs a custom bitmap cursor.

bitmap and mask make up the bitmap. hotX and hotY define the cursor’s hot spot.

If hotX is negative, it is set to the bitmap().width()/2 . If hotY is negative, it is set to the bitmap().height()/2 .

The cursor bitmap (B) and mask (M) bits are combined like this:

• B=1 and M=1 gives black.

• B=0 and M=1 gives white.

• B=0 and M=0 gives transparent.

• B=1 and M=0 gives an XOR’d result under Windows, undefined results on all other platforms.

Use the global Qt color color0 to draw 0-pixels and color1 to draw 1-pixels in the bitmaps.

Valid cursor sizes depend on the display hardware (or the underlying window system). We recommend using 32 x 32 cursors, because this size is supported on all platforms. Some platforms also support 16 x 16, 48 x 48, and 64 x 64 cursors.

See also

QBitmap() setMask()

Constructs a custom pixmap cursor.

pixmap is the image. It is usual to give it a mask (set using setMask() ). hotX and hotY define the cursor’s hot spot.

If hotX is negative, it is set to the pixmap().width()/2 . If hotY is negative, it is set to the pixmap().height()/2 .

Valid cursor sizes depend on the display hardware (or the underlying window system). We recommend using 32 x 32 cursors, because this size is supported on all platforms. Some platforms also support 16 x 16, 48 x 48, and 64 x 64 cursors.

See also

QPixmap() setMask()

PySide2.QtGui.QCursor.bitmap()

Return type:

PySide2.QtGui.QBitmap

Note

This function is deprecated.

New code should use the other overload which returns QBitmap by-value.

Returns the cursor bitmap, or None if it is one of the standard cursors.

PySide2.QtGui.QCursor.hotSpot()

Return type:

PySide2.QtCore.QPoint

Returns the cursor hot spot, or (0, 0) if it is one of the standard cursors.

PySide2.QtGui.QCursor.mask()

Return type:

PySide2.QtGui.QBitmap

Note

This function is deprecated.

New code should use the other overload which returns QBitmap by-value.

Returns the cursor bitmap mask, or None if it is one of the standard cursors.

PySide2.QtGui.QCursor.__ne__(rhs)

Parameters:

rhs – PySide2.QtGui.QCursor

Return type:

bool

PySide2.QtGui.QCursor.__eq__(rhs)

Parameters:

rhs – PySide2.QtGui.QCursor

Return type:

bool

PySide2.QtGui.QCursor.pixmap()

Return type:

PySide2.QtGui.QPixmap

Returns the cursor pixmap. This is only valid if the cursor is a pixmap cursor.

static PySide2.QtGui.QCursor.pos()

Return type:

PySide2.QtCore.QPoint

Returns the position of the cursor (hot spot) of the primary screen in global screen coordinates.

You can call mapFromGlobal() to translate it to widget coordinates.

Note

The position is queried from the windowing system. If mouse events are generated via other means (e.g., via QWindowSystemInterface in a unit test), those fake mouse moves will not be reflected in the returned value.

Note

On platforms where there is no windowing system or cursors are not available, the returned position is based on the mouse move events generated via QWindowSystemInterface.

See also

setPos() mapFromGlobal() mapToGlobal() primaryScreen()

static PySide2.QtGui.QCursor.pos(screen)

Parameters:

screen – PySide2.QtGui.QScreen

Return type:

PySide2.QtCore.QPoint

Returns the position of the cursor (hot spot) of the screen in global screen coordinates.

You can call mapFromGlobal() to translate it to widget coordinates.

See also

setPos() mapFromGlobal() mapToGlobal()

static PySide2.QtGui.QCursor.setPos(screen, p)

Parameters:

• screen – PySide2.QtGui.QScreen

• p – PySide2.QtCore.QPoint

static PySide2.QtGui.QCursor.setPos(screen, x, y)

Parameters:

• screen – PySide2.QtGui.QScreen

• x – int

• y – int

Moves the cursor (hot spot) of the screen to the global screen position (x , y ).

You can call mapToGlobal() to translate widget coordinates to global screen coordinates.

Note

Calling this function results in changing the cursor position through the windowing system. The windowing system will typically respond by sending mouse events to the application’s window. This means that the usage of this function should be avoided in unit tests and everywhere where fake mouse events are being injected via QWindowSystemInterface because the windowing system’s mouse state (with regards to buttons for example) may not match the state in the application-generated events.

Note

On platforms where there is no windowing system or cursors are not available, this function may do nothing.

See also

pos() mapFromGlobal() mapToGlobal()

static PySide2.QtGui.QCursor.setPos(p)

Parameters:

p – PySide2.QtCore.QPoint

This is an overloaded function.

Moves the cursor (hot spot) to the global screen position at point p .

static PySide2.QtGui.QCursor.setPos(x, y)

Parameters:

• x – int

• y – int

Moves the cursor (hot spot) of the primary screen to the global screen position (x , y ).

You can call mapToGlobal() to translate widget coordinates to global screen coordinates.

See also

pos() mapFromGlobal() mapToGlobal() primaryScreen()

PySide2.QtGui.QCursor.setShape(newShape)

Parameters:

newShape – CursorShape

Sets the cursor to the shape identified by shape .

See CursorShape for the list of cursor shapes.

See also

shape()

PySide2.QtGui.QCursor.shape()

Return type:

CursorShape

Returns the cursor shape identifier.

See also

setShape()

PySide2.QtGui.QCursor.swap(other)

Parameters:

other – PySide2.QtGui.QCursor

Swaps this cursor with the other cursor.