QGradient¶
Inherited by: QConicalGradient, QLinearGradient, QRadialGradient
Synopsis¶
Functions¶
def
__eq__
(gradient)def
__ne__
(other)def
coordinateMode
()def
interpolationMode
()def
setColorAt
(pos, color)def
setCoordinateMode
(mode)def
setInterpolationMode
(mode)def
setSpread
(spread)def
setStops
(stops)def
spread
()def
stops
()def
type
()
Detailed Description¶
Qt currently supports three types of gradient fills:
Linear gradients interpolate colors between start and end points.
Simple radial gradients interpolate colors between a focal point and end points on a circle surrounding it.
Extended radial gradients interpolate colors between a center and a focal circle.
Conical gradients interpolate colors around a center point.
A gradient’s type can be retrieved using the
type()
function. Each of the types is represented by a subclass ofQGradient
:
The colors in a gradient are defined using stop points of the
QGradientStop
type; i.e., a position and a color. Use thesetColorAt()
function to define a single stop point. Alternatively, use thesetStops()
function to define several stop points in one go. Note that the latter function replaces the current set of stop points.It is the gradient’s complete set of stop points (accessible through the
stops()
function) that describes how the gradient area should be filled. If no stop points have been specified, a gradient of black at 0 to white at 1 is used.A diagonal linear gradient from black at (100, 100) to white at (200, 200) could be specified like this:
QLinearGradient linearGrad(QPointF(100, 100), QPointF(200, 200)); linearGrad.setColorAt(0, Qt::black); linearGrad.setColorAt(1, Qt::white);A gradient can have an arbitrary number of stop points. The following would create a radial gradient starting with red in the center, blue and then green on the edges:
QRadialGradient radialGrad(QPointF(100, 100), 100); radialGrad.setColorAt(0, Qt::red); radialGrad.setColorAt(0.5, Qt::blue); radialGrad.setColorAt(1, Qt::green);It is possible to repeat or reflect the gradient outside its area by specifiying the
spread method
using thesetSpread()
function. The default is to pad the outside area with the color at the closest stop point. The currently setspread method
can be retrieved using thespread()
function. TheSpread
enum defines three different methods:
PadSpread
RepeatSpread
ReflectSpread
Note that the
setSpread()
function only has effect for linear and radial gradients. The reason is that the conical gradient is closed by definition, i.e. the conical gradient fills the entire circle from 0 - 360 degrees, while the boundary of a radial or a linear gradient can be specified through its radius or final stop points, respectively.The gradient coordinates can be specified in logical coordinates, relative to device coordinates, or relative to object bounding box coordinates. The
coordinate mode
can be set using thesetCoordinateMode()
function. The default isLogicalMode
, where the gradient coordinates are specified in the same way as the object coordinates. To retrieve the currently setcoordinate mode
usecoordinateMode()
.See also
- class PySide2.QtGui.QGradient¶
PySide2.QtGui.QGradient(arg__1)
PySide2.QtGui.QGradient(QGradient)
- param arg__1:
- param QGradient:
Constructs a gradient based on a predefined
preset
.The coordinate mode of the resulting gradient is
ObjectMode
, allowing the preset to be applied to arbitrary object sizes.
- PySide2.QtGui.QGradient.Type¶
Specifies the type of gradient.
Constant
Description
QGradient.LinearGradient
Interpolates colors between start and end points (
QLinearGradient
).QGradient.RadialGradient
Interpolate colors between a focal point and end points on a circle surrounding it (
QRadialGradient
).QGradient.ConicalGradient
Interpolate colors around a center point (
QConicalGradient
).QGradient.NoGradient
No gradient is used.
See also
- PySide2.QtGui.QGradient.Spread¶
Specifies how the area outside the gradient area should be filled.
Constant
Description
QGradient.PadSpread
The area is filled with the closest stop color. This is the default.
QGradient.RepeatSpread
The gradient is repeated outside the gradient area.
QGradient.ReflectSpread
The gradient is reflected outside the gradient area.
See also
- PySide2.QtGui.QGradient.CoordinateMode¶
This enum specifies how gradient coordinates map to the paint device on which the gradient is used.
Constant
Description
QGradient.LogicalMode
This is the default mode. The gradient coordinates are specified logical space just like the object coordinates.
QGradient.ObjectMode
In this mode the gradient coordinates are relative to the bounding rectangle of the object being drawn, with (0,0) in the top left corner, and (1,1) in the bottom right corner of the object’s bounding rectangle. This value was added in Qt 5.12.
QGradient.StretchToDeviceMode
In this mode the gradient coordinates are relative to the bounding rectangle of the paint device, with (0,0) in the top left corner, and (1,1) in the bottom right corner of the paint device.
QGradient.ObjectBoundingMode
This mode is the same as , except that the {
transform()
} {brush transform}, if any, is applied relative to the logical space instead of the object space. This enum value is deprecated and should not be used in new code.
- PySide2.QtGui.QGradient.InterpolationMode¶
Constant
Description
QGradient.ComponentInterpolation
The color components and the alpha component are independently linearly interpolated.
QGradient.ColorInterpolation
The colors are linearly interpolated in premultiplied color space.
- PySide2.QtGui.QGradient.Preset¶
This enum specifies a set of predefined presets for
QGradient
, based on the gradients from https://webgradients.com/ .Constant
Description
QGradient.WarmFlame
QGradient.NightFade
QGradient.SpringWarmth
QGradient.JuicyPeach
QGradient.YoungPassion
QGradient.LadyLips
QGradient.SunnyMorning
QGradient.RainyAshville
QGradient.FrozenDreams
QGradient.WinterNeva
QGradient.DustyGrass
QGradient.TemptingAzure
QGradient.HeavyRain
QGradient.AmyCrisp
QGradient.MeanFruit
QGradient.DeepBlue
QGradient.RipeMalinka
QGradient.CloudyKnoxville
QGradient.MalibuBeach
QGradient.NewLife
QGradient.TrueSunset
QGradient.MorpheusDen
QGradient.RareWind
QGradient.NearMoon
QGradient.WildApple
QGradient.SaintPetersburg
QGradient.PlumPlate
QGradient.EverlastingSky
QGradient.HappyFisher
QGradient.Blessing
QGradient.SharpeyeEagle
QGradient.LadogaBottom
QGradient.LemonGate
QGradient.ItmeoBranding
QGradient.ZeusMiracle
QGradient.OldHat
QGradient.StarWine
QGradient.HappyAcid
QGradient.AwesomePine
QGradient.NewYork
QGradient.ShyRainbow
QGradient.MixedHopes
QGradient.FlyHigh
QGradient.StrongBliss
QGradient.FreshMilk
QGradient.SnowAgain
QGradient.FebruaryInk
QGradient.KindSteel
QGradient.SoftGrass
QGradient.GrownEarly
QGradient.SharpBlues
QGradient.ShadyWater
QGradient.DirtyBeauty
QGradient.GreatWhale
QGradient.TeenNotebook
QGradient.PoliteRumors
QGradient.SweetPeriod
QGradient.WideMatrix
QGradient.SoftCherish
QGradient.RedSalvation
QGradient.BurningSpring
QGradient.NightParty
QGradient.SkyGlider
QGradient.HeavenPeach
QGradient.PurpleDivision
QGradient.AquaSplash
QGradient.SpikyNaga
QGradient.LoveKiss
QGradient.CleanMirror
QGradient.PremiumDark
QGradient.ColdEvening
QGradient.CochitiLake
QGradient.SummerGames
QGradient.PassionateBed
QGradient.MountainRock
QGradient.DesertHump
QGradient.JungleDay
QGradient.PhoenixStart
QGradient.OctoberSilence
QGradient.FarawayRiver
QGradient.AlchemistLab
QGradient.OverSun
QGradient.PremiumWhite
QGradient.MarsParty
QGradient.EternalConstance
QGradient.JapanBlush
QGradient.SmilingRain
QGradient.CloudyApple
QGradient.BigMango
QGradient.HealthyWater
QGradient.AmourAmour
QGradient.RiskyConcrete
QGradient.StrongStick
QGradient.ViciousStance
QGradient.PaloAlto
QGradient.HappyMemories
QGradient.MidnightBloom
QGradient.Crystalline
QGradient.PartyBliss
QGradient.ConfidentCloud
QGradient.LeCocktail
QGradient.RiverCity
QGradient.FrozenBerry
QGradient.ChildCare
QGradient.FlyingLemon
QGradient.NewRetrowave
QGradient.HiddenJaguar
QGradient.AboveTheSky
QGradient.Nega
QGradient.DenseWater
QGradient.Seashore
QGradient.MarbleWall
QGradient.CheerfulCaramel
QGradient.NightSky
QGradient.MagicLake
QGradient.YoungGrass
QGradient.ColorfulPeach
QGradient.GentleCare
QGradient.PlumBath
QGradient.HappyUnicorn
QGradient.AfricanField
QGradient.SolidStone
QGradient.OrangeJuice
QGradient.GlassWater
QGradient.NorthMiracle
QGradient.FruitBlend
QGradient.MillenniumPine
QGradient.HighFlight
QGradient.MoleHall
QGradient.SpaceShift
QGradient.ForestInei
QGradient.RoyalGarden
QGradient.RichMetal
QGradient.JuicyCake
QGradient.SmartIndigo
QGradient.SandStrike
QGradient.NorseBeauty
QGradient.AquaGuidance
QGradient.SunVeggie
QGradient.SeaLord
QGradient.BlackSea
QGradient.GrassShampoo
QGradient.LandingAircraft
QGradient.WitchDance
QGradient.SleeplessNight
QGradient.AngelCare
QGradient.CrystalRiver
QGradient.SoftLipstick
QGradient.SaltMountain
QGradient.PerfectWhite
QGradient.FreshOasis
QGradient.StrictNovember
QGradient.MorningSalad
QGradient.DeepRelief
QGradient.SeaStrike
QGradient.NightCall
QGradient.SupremeSky
QGradient.LightBlue
QGradient.MindCrawl
QGradient.LilyMeadow
QGradient.SugarLollipop
QGradient.SweetDessert
QGradient.MagicRay
QGradient.TeenParty
QGradient.FrozenHeat
QGradient.GagarinView
QGradient.FabledSunset
QGradient.PerfectBlue
New in version 5.12.
- PySide2.QtGui.QGradient.coordinateMode()¶
- Return type:
Returns the coordinate mode of this gradient. The default mode is
LogicalMode
.See also
- PySide2.QtGui.QGradient.interpolationMode()¶
- Return type:
Returns the interpolation mode of this gradient. The default mode is .
- PySide2.QtGui.QGradient.__ne__(other)¶
- Parameters:
other –
PySide2.QtGui.QGradient
- Return type:
bool
Returns
true
if the gradient is the same as the othergradient
specified; otherwise returnsfalse
.See also
operator==()
- PySide2.QtGui.QGradient.__eq__(gradient)¶
- Parameters:
gradient –
PySide2.QtGui.QGradient
- Return type:
bool
Returns
true
if the gradient is the same as the othergradient
specified; otherwise returnsfalse
.See also
operator!=()
- PySide2.QtGui.QGradient.setColorAt(pos, color)¶
- Parameters:
pos – float
color –
PySide2.QtGui.QColor
Creates a stop point at the given
position
with the givencolor
. The givenposition
must be in the range 0 to 1.See also
- PySide2.QtGui.QGradient.setCoordinateMode(mode)¶
- Parameters:
mode –
CoordinateMode
Sets the coordinate mode of this gradient to
mode
. The default mode isLogicalMode
.See also
- PySide2.QtGui.QGradient.setInterpolationMode(mode)¶
- Parameters:
mode –
InterpolationMode
Sets the interpolation mode of this gradient to
mode
. The default mode is .
- PySide2.QtGui.QGradient.setSpread(spread)¶
- Parameters:
spread –
Spread
Specifies the spread
method
that should be used for this gradient.Note that this function only has effect for linear and radial gradients.
See also
- PySide2.QtGui.QGradient.setStops(stops)¶
- Parameters:
stops –
Replaces the current set of stop points with the given
stopPoints
. The positions of the points must be in the range 0 to 1, and must be sorted with the lowest point first.See also
- PySide2.QtGui.QGradient.spread()¶
- Return type:
Returns the spread method use by this gradient. The default is
PadSpread
.See also
- PySide2.QtGui.QGradient.stops()¶
- Return type:
Returns the stop points for this gradient.
If no stop points have been specified, a gradient of black at 0 to white at 1 is used.
See also
© 2022 The Qt Company Ltd. Documentation contributions included herein are the copyrights of their respective owners. The documentation provided herein is licensed under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation. Qt and respective logos are trademarks of The Qt Company Ltd. in Finland and/or other countries worldwide. All other trademarks are property of their respective owners.