QNetworkSession

The QNetworkSession class provides control over the system’s access points and enables session management for cases when multiple clients access the same access point. More…

Inheritance diagram of PySide2.QtNetwork.QNetworkSession

New in version 4.7.

Synopsis

Functions

Slots

Signals

Detailed Description

A QNetworkSession enables control over the system’s network interfaces. The session’s configuration parameter are determined via the QNetworkConfiguration object to which it is bound. Depending on the type of the session (single access point or service network) a session may be linked to one or more network interfaces. By means of opening and closing of network sessions a developer can start and stop the systems network interfaces. If the configuration represents multiple access points (see ServiceNetwork ) more advanced features such as roaming may be supported.

QNetworkSession supports session management within the same process and depending on the platform’s capabilities may support out-of-process sessions. If the same network configuration is used by multiple open sessions the underlying network interface is only terminated once the last session has been closed.

Roaming

Applications may connect to the preferredConfigurationChanged() signal in order to receive notifications when a more suitable access point becomes available. In response to this signal the application must either initiate the roaming via migrate() or ignore() the new access point. Once the session has roamed the newConfigurationActivated() signal is emitted. The application may now test the carrier and must either accept() or reject() it. The session will return to the previous access point if the roaming was rejected. The subsequent state diagram depicts the required state transitions.

../../_images/roaming-states.png

Some platforms may distinguish forced roaming and application level roaming (ALR). ALR implies that the application controls (via migrate() , ignore() , accept() and reject() ) whether a network session can roam from one access point to the next. Such control is useful if the application maintains stateful socket connections and wants to control the transition from one interface to the next. Forced roaming implies that the system automatically roams to the next network without consulting the application. This has the advantage that the application can make use of roaming features without actually being aware of it. It is expected that the application detects that the underlying socket is broken and automatically reconnects via the new network link.

If the platform supports both modes of roaming, an application indicates its preference by connecting to the preferredConfigurationChanged() signal. Connecting to this signal means that the application wants to take control over the roaming behavior and therefore implies application level roaming. If the client does not connect to the preferredConfigurationChanged() , forced roaming is used. If forced roaming is not supported the network session will not roam by default.

Some applications may want to suppress any form of roaming altogether. Possible use cases may be high priority downloads or remote services which cannot handle a roaming enabled client. Clients can suppress roaming by connecting to the preferredConfigurationChanged() signal and answer each signal emission with ignore() .

See also

QNetworkConfiguration QNetworkConfigurationManager

class PySide2.QtNetwork.QNetworkSession(connConfig[, parent=None])

Constructs a session based on connectionConfig with the given parent .

See also

QNetworkConfiguration

PySide2.QtNetwork.QNetworkSession.State

This enum describes the connectivity state of the session. If the session is based on a single access point configuration the state of the session is the same as the state of the associated network interface.

Constant

Description

QNetworkSession.Invalid

The session is invalid due to an invalid configuration. This may happen due to a removed access point or a configuration that was invalid to begin with.

QNetworkSession.NotAvailable

The session is based on a defined but not yet discovered QNetworkConfiguration (see StateFlag ).

QNetworkSession.Connecting

The network session is being established.

QNetworkSession.Connected

The network session is connected. If the current process wishes to use this session it has to register its interest by calling open() . A network session is considered to be ready for socket operations if it isOpen() and connected.

QNetworkSession.Closing

The network session is in the process of being shut down.

QNetworkSession.Disconnected

The network session is not connected. The associated QNetworkConfiguration has the state Discovered .

QNetworkSession.Roaming

The network session is roaming from one access point to another access point.

New in version 4.7.

PySide2.QtNetwork.QNetworkSession.SessionError

This enum describes the session errors that can occur.

Constant

Description

QNetworkSession.UnknownSessionError

An unidentified error occurred.

QNetworkSession.SessionAbortedError

The session was aborted by the user or system.

QNetworkSession.RoamingError

The session cannot roam to a new configuration.

QNetworkSession.OperationNotSupportedError

The operation is not supported for current configuration.

QNetworkSession.InvalidConfigurationError

The operation cannot currently be performed for the current configuration.

New in version 4.7.

PySide2.QtNetwork.QNetworkSession.UsagePolicy

These flags allow the system to inform the application of network usage restrictions that may be in place.

Constant

Description

QNetworkSession.NoPolicy

No policy in force, usage is unrestricted.

QNetworkSession.NoBackgroundTrafficPolicy

Background network traffic (not user initiated) should be avoided for example to save battery or data charges
PySide2.QtNetwork.QNetworkSession.accept()

Instructs the session to permanently accept the new access point. Once this function has been called the session may not return to the old access point.

The old access point may be closed in the process if there are no other network sessions for it. Therefore any open socket that still uses the old access point may become unusable and should be closed before completing the migration.

PySide2.QtNetwork.QNetworkSession.activeTime()
Return type:

int

Returns the number of seconds that the session has been active.

PySide2.QtNetwork.QNetworkSession.bytesReceived()
Return type:

int

Returns the amount of data received in bytes; otherwise 0.

This field value includes the usage across all open network sessions which use the same network interface.

If the session is based on a service network configuration the number of sent bytes across all active member configurations are returned.

This function may not always be supported on all platforms and returns 0. The platform capability can be detected via DataStatistics .

Note

On some platforms this function may run the main event loop.

PySide2.QtNetwork.QNetworkSession.bytesWritten()
Return type:

int

Returns the amount of data sent in bytes; otherwise 0.

This field value includes the usage across all open network sessions which use the same network interface.

If the session is based on a service network configuration the number of sent bytes across all active member configurations are returned.

This function may not always be supported on all platforms and returns 0. The platform capability can be detected via DataStatistics .

Note

On some platforms this function may run the main event loop.

PySide2.QtNetwork.QNetworkSession.close()

Decreases the session counter on the associated network configuration. If the session counter reaches zero the active network interface is shut down. This also means that state() will only change from Connected to Disconnected if the current session was the last open session.

If the platform does not support out-of-process sessions calling this function does not stop the interface. In this case stop() has to be used to force a shut down. The platform capabilities can be detected via capabilities() .

Note that this call is asynchronous. Depending on the outcome of this call the results can be enquired by connecting to the stateChanged() , opened() or error() signals.

See also

open() stop() isOpen()

PySide2.QtNetwork.QNetworkSession.closed()
PySide2.QtNetwork.QNetworkSession.configuration()
Return type:

PySide2.QtNetwork.QNetworkConfiguration

Returns the QNetworkConfiguration that this network session object is based on.

See also

QNetworkConfiguration

PySide2.QtNetwork.QNetworkSession.error()
Return type:

SessionError

Returns the type of error that last occurred.

See also

state() errorString()

PySide2.QtNetwork.QNetworkSession.error(arg__1)
Parameters:

arg__1 – SessionError

PySide2.QtNetwork.QNetworkSession.errorString()
Return type:

str

Returns a human-readable description of the last device error that occurred.

See also

error()

PySide2.QtNetwork.QNetworkSession.ignore()

This function indicates that the application does not wish to roam the session.

See also

migrate()

PySide2.QtNetwork.QNetworkSession.interface()
Return type:

PySide2.QtNetwork.QNetworkInterface

Returns the network interface that is used by this session.

This function only returns a valid QNetworkInterface when this session is Connected .

The returned interface may change as a result of a roaming process.

See also

state()

PySide2.QtNetwork.QNetworkSession.isOpen()
Return type:

bool

Returns true if this session is open. If the number of all open sessions is greater than zero the underlying network interface will remain connected/up.

The session can be controlled via open() and close() .

PySide2.QtNetwork.QNetworkSession.migrate()

Instructs the session to roam to the new access point. The old access point remains active until the application calls accept() .

The newConfigurationActivated() signal is emitted once roaming has been completed.

See also

accept()

PySide2.QtNetwork.QNetworkSession.newConfigurationActivated()
PySide2.QtNetwork.QNetworkSession.open()

Creates an open session which increases the session counter on the underlying network interface. The system will not terminate a network interface until the session reference counter reaches zero. Therefore an open session allows an application to register its use of the interface.

As a result of calling the interface will be started if it is not connected/up yet. Some platforms may not provide support for out-of-process sessions. On such platforms the session counter ignores any sessions held by another process. The platform capabilities can be detected via capabilities() .

Note that this call is asynchronous. Depending on the outcome of this call the results can be enquired by connecting to the stateChanged() , opened() or error() signals.

It is not a requirement to open a session in order to monitor the underlying network interface.

See also

close() stop() isOpen()

PySide2.QtNetwork.QNetworkSession.opened()
PySide2.QtNetwork.QNetworkSession.preferredConfigurationChanged(config, isSeamless)
Parameters:
PySide2.QtNetwork.QNetworkSession.reject()

The new access point is not suitable for the application. By calling this function the session returns to the previous access point/configuration. This action may invalidate any socket that has been created via the not desired access point.

See also

accept()

PySide2.QtNetwork.QNetworkSession.sessionProperty(key)
Parameters:

key – str

Return type:

object

Returns the value for property key .

A network session can have properties attached which may describe the session in more details. This function can be used to gain access to those properties.

The following property keys are guaranteed to be specified on all platforms:

Key

Description

ActiveConfiguration

If the session isOpen() this property returns the identifier of the QNetworkConfiguration that is used by this session; otherwise an empty string.

The main purpose of this key is to determine which Internet access point is used if the session is based on a ServiceNetwork . The following code snippet highlights the difference:

QNetworkConfigurationManager mgr;
QNetworkConfiguration ap = mgr.defaultConfiguration();
QNetworkSession *session = new QNetworkSession(ap);
... //code activates session

QString ident = session->sessionProperty("ActiveConfiguration").toString();
if ( ap.type() == QNetworkConfiguration::ServiceNetwork ) {
    Q_ASSERT( ap.identifier() != ident );
    Q_ASSERT( ap.children().contains( mgr.configurationFromIdentifier(ident) ) );
} else if ( ap.type() == QNetworkConfiguration::InternetAccessPoint ) {
    Q_ASSERT( ap.identifier() == ident );
}
            \endcode

UserChoiceConfiguration

If the session isOpen() and is bound to a QNetworkConfiguration of type UserChoice, this property returns the identifier of the QNetworkConfiguration that the configuration resolved to when open() was called; otherwise an empty string.

The purpose of this key is to determine the real QNetworkConfiguration that the session is using. This key is different from ActiveConfiguration in that this key may return an identifier for either a service network or a Internet access points configurations, whereas ActiveConfiguration always returns identifiers to Internet access points configurations.

ConnectInBackground

Setting this property to true before calling open() implies that the connection attempt is made but if no connection can be established, the user is not connsulted and asked to select a suitable connection. This property is not set by default and support for it depends on the platform.

AutoCloseSessionTimeout

If the session requires polling to keep its state up to date, this property holds the timeout in milliseconds before the session will automatically close. If the value of this property is -1 the session will not automatically close. This property is set to -1 by default.

The purpose of this property is to minimize resource use on platforms that use polling to update the state of the session. Applications can set the value of this property to the desired timeout before the session is closed. In response to the closed() signal the network session should be deleted to ensure that all polling is stopped. The session can then be recreated once it is required again. This property has no effect for sessions that do not require polling.

See also

setSessionProperty()

PySide2.QtNetwork.QNetworkSession.setSessionProperty(key, value)
Parameters:

  • key – str

  • value – object

Sets the property value on the session. The property is identified using key . Removing an already set property can be achieved by passing an invalid QVariant .

Note that the UserChoiceConfiguration and ActiveConfiguration properties are read only and cannot be changed using this method.

See also

sessionProperty()

PySide2.QtNetwork.QNetworkSession.state()
Return type:

State

Returns the state of the session.

If the session is based on a single access point configuration the state of the session is the same as the state of the associated network interface. Therefore a network session object can be used to monitor network interfaces.

A ServiceNetwork based session summarizes the state of all its children and therefore returns the Connected state if at least one of the service network’s children() configurations is active.

Note that it is not required to hold an open session in order to obtain the network interface state. A connected but closed session may be used to monitor network interfaces whereas an open and connected session object may prevent the network interface from being shut down.

See also

error() stateChanged()

PySide2.QtNetwork.QNetworkSession.stateChanged(arg__1)
Parameters:

arg__1 – State

PySide2.QtNetwork.QNetworkSession.stop()

Invalidates all open sessions against the network interface and therefore stops the underlying network interface. This function always changes the session’s state() flag to Disconnected .

See also

open() close()

PySide2.QtNetwork.QNetworkSession.usagePolicies()
Return type:

UsagePolicies

Returns the network usage policies currently in force by the system.

PySide2.QtNetwork.QNetworkSession.usagePoliciesChanged(usagePolicies)
Parameters:

usagePolicies – UsagePolicies

PySide2.QtNetwork.QNetworkSession.waitForOpened([msecs=30000])
Parameters:

msecs – int

Return type:

bool

Waits until the session has been opened, up to msecs milliseconds. If the session has been opened, this function returns true ; otherwise it returns false . In the case where it returns false , you can call error() to determine the cause of the error.

The following example waits up to one second for the session to be opened:

session->open();
if (session->waitForOpened(1000))
    qDebug("Open!");

If msecs is -1, this function will not time out.

See also

open() error()