contacteditor.cpp Example File

 /****************************************************************************
 **
 ** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
 ** Contact: http://www.qt-project.org/legal
 **
 ** This file is part of the examples of the Qt Mobility Components.
 **
 ** $QT_BEGIN_LICENSE:BSD$
 ** You may use this file under the terms of the BSD license as follows:
 **
 ** "Redistribution and use in source and binary forms, with or without
 ** modification, are permitted provided that the following conditions are
 ** met:
 **   * Redistributions of source code must retain the above copyright
 **     notice, this list of conditions and the following disclaimer.
 **   * Redistributions in binary form must reproduce the above copyright
 **     notice, this list of conditions and the following disclaimer in
 **     the documentation and/or other materials provided with the
 **     distribution.
 **   * Neither the name of Digia Plc and its Subsidiary(-ies) nor the names
 **     of its contributors may be used to endorse or promote products derived
 **     from this software without specific prior written permission.
 **
 **
 ** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 ** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 ** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 ** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 ** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 ** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 ** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 ** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 ** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 ** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 ** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
 **
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/

 #include "contacteditor.h"

 #include <QtGui>
 #include <QDesktopServices>

 const int MAX_THUMBNAIL_DISPLAY_SIZE = 120;

 ContactEditor::ContactEditor(QWidget *parent)
         :QWidget(parent)
 {
     m_manager = 0;
     m_contactId = QContactLocalId(0);
     m_observer = 0;

     m_nameEdit = new QLineEdit(this);
     m_phoneEdit = new QLineEdit(this);
     m_emailEdit = new QLineEdit(this);
     m_addrEdit = new QLineEdit(this);
     m_thumbnailBtn = new QPushButton(tr("Set picture"), this);
     m_clearThumbnailBtn = new QPushButton(tr("Clear"), this);
     m_thumbnailView = new QLabel(this);
     connect(m_thumbnailBtn, SIGNAL(clicked()), this, SLOT(thumbnailClicked()));
     connect(m_clearThumbnailBtn, SIGNAL(clicked()), this, SLOT(clearThumbnailClicked()));

     QFormLayout *detailsLayout = new QFormLayout;
     QLabel *nameLabel = new QLabel(tr("Name"), this);
     QLabel *phoneLabel = new QLabel(tr("Phone"), this);
     QLabel *emailLabel = new QLabel(tr("Email"), this);
     QLabel *addressLabel = new QLabel(tr("Address"), this);
     QLabel *thumbnailLabel = new QLabel(tr("Picture"), this);
     QHBoxLayout *thumbnailBtnLayout = new QHBoxLayout;
     thumbnailBtnLayout->addWidget(m_thumbnailBtn);
     thumbnailBtnLayout->addWidget(m_clearThumbnailBtn);
     if (QApplication::desktop()->availableGeometry().width() < 360) {
         // Narrow screen: put label on separate line to textbox
         detailsLayout->addRow(nameLabel);
         detailsLayout->addRow(m_nameEdit);
         detailsLayout->addRow(phoneLabel);
         detailsLayout->addRow(m_phoneEdit);
         detailsLayout->addRow(emailLabel);
         detailsLayout->addRow(m_emailEdit);
         detailsLayout->addRow(addressLabel);
         detailsLayout->addRow(m_addrEdit);
         detailsLayout->addRow(thumbnailLabel);
         detailsLayout->addRow(thumbnailBtnLayout);
         detailsLayout->addRow(m_thumbnailView);
     } else {
         // Wide screen: put label on same line as textbox
         detailsLayout->addRow(nameLabel, m_nameEdit);
         detailsLayout->addRow(phoneLabel, m_phoneEdit);
         detailsLayout->addRow(emailLabel, m_emailEdit);
         detailsLayout->addRow(addressLabel, m_addrEdit);
         detailsLayout->addRow(thumbnailLabel, thumbnailBtnLayout);
         detailsLayout->addRow("", m_thumbnailView);
     }
     detailsLayout->setFieldGrowthPolicy(QFormLayout::ExpandingFieldsGrow);
     detailsLayout->setSizeConstraint(QLayout::SetMinAndMaxSize);

     QScrollArea *detailsScrollArea = new QScrollArea(this);
     detailsScrollArea->setWidgetResizable(true);
     QWidget *detailsContainer = new QWidget(detailsScrollArea);
     detailsContainer->setLayout(detailsLayout);
     detailsScrollArea->setWidget(detailsContainer);

     QVBoxLayout *editLayout = new QVBoxLayout;
     editLayout->addWidget(detailsScrollArea);

 #ifdef Q_OS_SYMBIAN
     // In symbian "save" and "cancel" buttons are softkeys.
     m_saveBtn = new QAction(tr("Save"), this);
     m_saveBtn->setSoftKeyRole(QAction::PositiveSoftKey);
     addAction(m_saveBtn);
     connect(m_saveBtn, SIGNAL(triggered(bool)), this, SLOT(saveClicked()));
     m_cancelBtn = new QAction(tr("Cancel"), this);
     m_cancelBtn->setSoftKeyRole(QAction::NegativeSoftKey);
     addAction(m_cancelBtn);
     connect(m_cancelBtn, SIGNAL(triggered(bool)), this, SLOT(cancelClicked()));
 #else
     m_saveBtn = new QPushButton(tr("&Save"), this);
     m_saveBtn->setDefault(true);
     connect(m_saveBtn, SIGNAL(clicked()), this, SLOT(saveClicked()));
     m_cancelBtn = new QPushButton(tr("&Cancel"), this);
     connect(m_cancelBtn, SIGNAL(clicked()), this, SLOT(cancelClicked()));
     QHBoxLayout *btnLayout = new QHBoxLayout;
     btnLayout->addWidget(m_saveBtn);
     btnLayout->addWidget(m_cancelBtn);
     editLayout->addLayout(btnLayout);
 #endif

     setLayout(editLayout);
 }

 ContactEditor::~ContactEditor()
 {
     delete m_observer;
 }

 void ContactEditor::setCurrentContact(QContactManager* manager, QContactLocalId currentId)
 {
     m_manager = manager;
     m_contactId = currentId;
     m_newThumbnailPath = QString();

     // Clear UI
     m_nameEdit->clear();
     m_phoneEdit->clear();
     m_emailEdit->clear();
     m_addrEdit->clear();

     if (manager == 0) {
         m_saveBtn->setEnabled(false);
         return;
     }

     // enable the UI.
     m_saveBtn->setEnabled(true);

     // otherwise, build from the contact details.
     QContact contact;
     if (m_contactId != QContactLocalId(0))
         contact = manager->contact(m_contactId);

     // Set an observer on the contact to watch it for changes from another process
     delete m_observer;
     m_observer = new QContactObserver(manager, m_contactId);
     connect(m_observer, SIGNAL(contactChanged()), this, SLOT(contactChanged()));

     updateUi(contact);
 }

 void ContactEditor::updateUi(const QContact& contact)
 {
     // Disable fields & buttons according to what the backend supports
     QMap<QString, QContactDetailDefinition> defs = m_manager->detailDefinitions(QContactType::TypeContact);

     // name
     if (m_contactId != QContactLocalId(0))
         m_nameEdit->setText(contact.displayLabel());

     // phonenumber
     QContactPhoneNumber phn = contact.detail(QContactPhoneNumber::DefinitionName);
     m_phoneEdit->setText(phn.value(QContactPhoneNumber::FieldNumber));

     // email
     if (defs.contains(QContactEmailAddress::DefinitionName)) {
         QContactEmailAddress em = contact.detail(QContactEmailAddress::DefinitionName);
         m_emailEdit->setText(em.value(QContactEmailAddress::FieldEmailAddress));
         m_emailEdit->setReadOnly(false);
     } else {
         m_emailEdit->setText("<not supported>");
         m_emailEdit->setReadOnly(true);
     }

     // address
     if (defs.contains(QContactAddress::DefinitionName)) {
         QContactAddress adr = contact.detail(QContactAddress::DefinitionName);
         m_addrEdit->setText(adr.value(QContactAddress::FieldStreet)); // ugly hack.
         m_addrEdit->setReadOnly(false);
     } else {
         m_addrEdit->setText("<not supported>");
         m_addrEdit->setReadOnly(true);
     }

     // thumbnail viewer
     if (defs.contains(QContactThumbnail::DefinitionName)) {
         m_thumbnailBtn->setEnabled(true);
         QContactThumbnail thumb = contact.detail(QContactThumbnail::DefinitionName);
         m_thumbnailView->clear();
         m_thumbnail = thumb.thumbnail();
         if (m_thumbnail.isNull()) {
             m_thumbnailView->clear();
             m_clearThumbnailBtn->setDisabled(true);
         } else {
             setThumbnailPixmap(QPixmap::fromImage(m_thumbnail));
         }
     } else {
         m_thumbnailBtn->setDisabled(true);
         m_clearThumbnailBtn->setDisabled(true);
     }
 }

 QString ContactEditor::nameField()
 {
     // return the field which the name data should be saved in.
     if (!m_manager)
         return QString();

     QMap<QString, QContactDetailDefinition> defs = m_manager->detailDefinitions(QContactType::TypeContact);
     QContactDetailDefinition nameDef = defs.value(QContactName::DefinitionName);
     if (nameDef.fields().keys().contains(QContactName::FieldCustomLabel)) {
         return QString(QLatin1String(QContactName::FieldCustomLabel));
     } else if (nameDef.fields().keys().contains(QContactName::FieldFirstName)) {
         return QString(QLatin1String(QContactName::FieldFirstName));
     } else {
         return QString();
     }
 }

 void ContactEditor::setThumbnailPixmap(const QPixmap &pixmap)
 {
     if (pixmap.isNull())
         return;
     QPixmap scaled = pixmap.scaled(QSize(MAX_THUMBNAIL_DISPLAY_SIZE, MAX_THUMBNAIL_DISPLAY_SIZE),
                                    Qt::KeepAspectRatio,
                                    Qt::SmoothTransformation);
     m_thumbnailView->setPixmap(scaled);
     m_thumbnailView->setMaximumSize(scaled.size());
     m_clearThumbnailBtn->setEnabled(true);
 }

 void ContactEditor::clearThumbnailClicked()
 {
     m_thumbnailView->clear();
     m_thumbnail = QImage();
     m_newThumbnailPath.clear();
     m_clearThumbnailBtn->setDisabled(true);
 }

 void ContactEditor::thumbnailClicked()
 {
     // put up a file dialog, and update the new thumbnail path.
     QString docPath = QDesktopServices::storageLocation(QDesktopServices::DocumentsLocation);
     if (docPath.isEmpty())
         docPath = QDesktopServices::storageLocation(QDesktopServices::HomeLocation);
     if (docPath.isEmpty())
         docPath = ".";
     QString fileName = QFileDialog::getOpenFileName(this,
        tr("Select Contact Picture"), docPath, tr("Image Files (*.png *.jpg *.bmp)"));

     if (!fileName.isEmpty()) {
         m_newThumbnailPath = fileName;
         m_thumbnail = QImage(m_newThumbnailPath);
         setThumbnailPixmap(QPixmap::fromImage(m_thumbnail));
     }
 }

 void ContactEditor::saveClicked()
 {
     // Stop observing the contact
     if (m_observer) {
         m_observer->disconnect();
     }

     if (!m_manager) {
         qWarning() << "No manager selected; cannot save.";
     } else {
         QContact curr;
         if (m_contactId != QContactLocalId(0))
             curr = m_manager->contact(m_contactId);

         if (m_nameEdit->text().isEmpty()) {
             QMessageBox::information(this, "Failed!", "You must give a name for the contact!");
             return;
         }

         if (m_nameEdit->text() != m_manager->synthesizedContactDisplayLabel(curr)) {
             // if the name has changed (ie, is different to the synthed label) then save it as a custom label.
             QString saveNameField = nameField();
             if (!saveNameField.isEmpty()) {
                 QContactName nm = curr.detail(QContactName::DefinitionName);
                 nm.setValue(saveNameField, m_nameEdit->text());
                 curr.saveDetail(&nm);
             }
         }

         QContactPhoneNumber phn = curr.detail(QContactPhoneNumber::DefinitionName);
         phn.setNumber(m_phoneEdit->text());
         curr.saveDetail(&phn);

         if (!m_emailEdit->isReadOnly()) {
             QContactEmailAddress em = curr.detail(QContactEmailAddress::DefinitionName);
             em.setEmailAddress(m_emailEdit->text());
             curr.saveDetail(&em);
         }

         if (!m_addrEdit->isReadOnly()) {
             QContactAddress adr = curr.detail(QContactAddress::DefinitionName);
             adr.setStreet(m_addrEdit->text());
             curr.saveDetail(&adr);
         }

         if (m_thumbnailBtn->isEnabled()) {
             QContactThumbnail thumb = curr.detail(QContactThumbnail::DefinitionName);
             QImage img(m_thumbnail);
             thumb.setThumbnail(img);
             curr.saveDetail(&thumb);
         }

         curr = m_manager->compatibleContact(curr);
         bool success = m_manager->saveContact(&curr);
         if (!success)
             QMessageBox::information(this, "Failed!", QString("Failed to save contact!\n(error code %1)").arg(m_manager->error()));
     }

     emit showListPage();
 }

 void ContactEditor::cancelClicked()
 {
     emit showListPage();
 }

 void ContactEditor::contactChanged()
 {
     QMessageBox::StandardButton button =
         QMessageBox::question(this, "Contact updated",
                 "The contact has been changed by some other process.\n\nDo you want to reload it?",
                 QMessageBox::Yes | QMessageBox::No);
     if (button == QMessageBox::Yes) {
         updateUi(m_manager->contact(m_contactId));
     }
 }