QLowEnergyAdvertisingData Class
The QLowEnergyAdvertisingData class represents the data to be broadcast during Bluetooth Low Energy advertising. More...
| Header: | #include <QLowEnergyAdvertisingData> |
| qmake: | QT += bluetooth |
- List of all members, including inherited members
- QLowEnergyAdvertisingData is part of Implicitly Shared Classes.
Public Types
| enum | Discoverability { DiscoverabilityNone, DiscoverabilityLimited, DiscoverabilityGeneral } |
Public Functions
| QLowEnergyAdvertisingData() | |
| QLowEnergyAdvertisingData(const QLowEnergyAdvertisingData &other) | |
| ~QLowEnergyAdvertisingData() | |
| QLowEnergyAdvertisingData::Discoverability | discoverability() const |
| bool | includePowerLevel() const |
| QString | localName() const |
| QByteArray | manufacturerData() const |
| quint16 | manufacturerId() const |
| QByteArray | rawData() const |
| QList<QBluetoothUuid> | services() const |
| void | setDiscoverability(QLowEnergyAdvertisingData::Discoverability mode) |
| void | setIncludePowerLevel(bool doInclude) |
| void | setLocalName(const QString &name) |
| void | setManufacturerData(quint16 id, const QByteArray &data) |
| void | setRawData(const QByteArray &data) |
| void | setServices(const QList<QBluetoothUuid> &services) |
| void | swap(QLowEnergyAdvertisingData &other) |
| QLowEnergyAdvertisingData & | operator=(const QLowEnergyAdvertisingData &other) |
Static Public Members
| quint16 | invalidManufacturerId() |
Related Non-Members
| bool | operator!=(const QLowEnergyAdvertisingData &data1, const QLowEnergyAdvertisingData &data2) |
| bool | operator==(const QLowEnergyAdvertisingData &data1, const QLowEnergyAdvertisingData &data2) |
Detailed Description
This data can include the device name, GATT services offered by the device, and so on. The data set via this class will be used when advertising is started by calling QLowEnergyController::startAdvertising(). Objects of this class can represent an Advertising Data packet or a Scan Response packet.
Note: The actual data packets sent over the advertising channel cannot contain more than 31 bytes. If the variable-length data set via this class exceeds that limit, it will be left out of the packet or truncated, depending on the type. On Android, advertising will fail if advertising data is larger than 31 bytes. On Bluez DBus backend the advertising length limit and the behavior when it is exceeded is up to BlueZ; it may for example support extended advertising. For the most predictable behavior keep the advertising data short.
See also QLowEnergyAdvertisingParameters and QLowEnergyController::startAdvertising().
Member Type Documentation
enum QLowEnergyAdvertisingData::Discoverability
The discoverability of the advertising device as defined by the Generic Access Profile.
| Constant | Value | Description |
|---|---|---|
QLowEnergyAdvertisingData::DiscoverabilityNone | 0 | The advertising device does not wish to be discoverable by scanning devices. |
QLowEnergyAdvertisingData::DiscoverabilityLimited | 1 | The advertising device wishes to be discoverable with a high priority. Note that this mode is not compatible with using a white list. The value of QLowEnergyAdvertisingParameters::filterPolicy() is always assumed to be QLowEnergyAdvertisingParameters::IgnoreWhiteList when limited discoverability is used. |
QLowEnergyAdvertisingData::DiscoverabilityGeneral | 2 | The advertising device wishes to be discoverable by scanning devices. |
Member Function Documentation
QLowEnergyAdvertisingData::QLowEnergyAdvertisingData()
Creates a new object of this class. All values are initialized to their defaults according to the Bluetooth Low Energy specification.
QLowEnergyAdvertisingData::QLowEnergyAdvertisingData(const QLowEnergyAdvertisingData &other)
Constructs a new object of this class that is a copy of other.
QLowEnergyAdvertisingData::~QLowEnergyAdvertisingData()
Destroys this object.
QLowEnergyAdvertisingData::Discoverability QLowEnergyAdvertisingData::discoverability() const
Returns the discoverability mode of the advertising device. The default is DiscoverabilityNone.
See also setDiscoverability().
bool QLowEnergyAdvertisingData::includePowerLevel() const
Returns whether to include the device's transmit power level in the advertising data. The default is false.
See also setIncludePowerLevel().
[static] quint16 QLowEnergyAdvertisingData::invalidManufacturerId()
Returns an invalid manufacturer id. If this value is set as the manufacturer id (which it is by default), no manufacturer data will be present in the advertising data.
QString QLowEnergyAdvertisingData::localName() const
Returns the name of the local device that is to be advertised.
See also setLocalName().
QByteArray QLowEnergyAdvertisingData::manufacturerData() const
Returns the manufacturer data. The default is an empty byte array.
See also setManufacturerData().
quint16 QLowEnergyAdvertisingData::manufacturerId() const
Returns the manufacturer id. The default is QLowEnergyAdvertisingData::invalidManufacturerId(), which means the data will not be advertised.
QByteArray QLowEnergyAdvertisingData::rawData() const
Returns the user-supplied raw data to be advertised. The default is an empty byte array.
See also setRawData().
QList<QBluetoothUuid> QLowEnergyAdvertisingData::services() const
Returns the list of service UUIDs to be advertised. By default, this list is empty.
See also setServices().
void QLowEnergyAdvertisingData::setDiscoverability(QLowEnergyAdvertisingData::Discoverability mode)
Sets the discoverability type of the advertising device to mode.
Note: Discoverability information can only appear in an actual advertising data packet. If this object acts as scan response data, a call to this function will have no effect on the scan response sent.
See also discoverability().
void QLowEnergyAdvertisingData::setIncludePowerLevel(bool doInclude)
Specifies whether to include the device's transmit power level in the advertising data. If doInclude is true, the data will be included, otherwise it will not.
See also includePowerLevel().
void QLowEnergyAdvertisingData::setLocalName(const QString &name)
Specifies that name should be broadcast as the name of the device. If the full name does not fit into the advertising data packet, an abbreviated name is sent, as described by the Bluetooth Low Energy specification.
On Android, the local name cannot be changed. Android always uses the device name. If this local name is not empty, the Android implementation includes the device name in the advertisement packet; otherwise the device name is omitted from the advertisement packet.
See also localName().
void QLowEnergyAdvertisingData::setManufacturerData(quint16 id, const QByteArray &data)
Sets the manufacturer id and data. The id parameter is a company identifier as assigned by the Bluetooth SIG. The data parameter is an arbitrary value.
Note: macOS and iOS do not support advertising of manufacturer id or data, so the provided parameters will be ignored on these platforms.
See also manufacturerData().
void QLowEnergyAdvertisingData::setRawData(const QByteArray &data)
Sets the data to be advertised to data. If the value is not an empty byte array, it will be sent as-is as the advertising data and all other data in this object will be ignored. This can be used to send non-standard data.
Note: If data is longer than 31 bytes, it will be truncated. It is the caller's responsibility to ensure that data is well-formed.
Setting raw advertising data is only supported on the Linux Bluetooth Kernel API backend. Other backends do not allow to specify the raw advertising data as a global field.
See also rawData().
void QLowEnergyAdvertisingData::setServices(const QList<QBluetoothUuid> &services)
Specifies that the service UUIDs in services should be advertised. If the entire list does not fit into the packet, an incomplete list is sent as specified by the Bluetooth Low Energy specification.
See also services().
void QLowEnergyAdvertisingData::swap(QLowEnergyAdvertisingData &other)
Swaps this object with other.
QLowEnergyAdvertisingData &QLowEnergyAdvertisingData::operator=(const QLowEnergyAdvertisingData &other)
Makes this object a copy of other and returns the new value of this object.
Related Non-Members
bool operator!=(const QLowEnergyAdvertisingData &data1, const QLowEnergyAdvertisingData &data2)
Returns true if data1 and data2 are not equal with respect to their public state, otherwise returns false.
bool operator==(const QLowEnergyAdvertisingData &data1, const QLowEnergyAdvertisingData &data2)
Returns true if data1 and data2 are equal with respect to their public state, otherwise returns false.
© 2024 The Qt Company Ltd. Documentation contributions included herein are the copyrights of their respective owners. The documentation provided herein is licensed under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation. Qt and respective logos are trademarks of The Qt Company Ltd. in Finland and/or other countries worldwide. All other trademarks are property of their respective owners.
