QApplication Class

Member Function Documentation

QApplication::QApplication(int &argc, char **argv)

Initializes the window system and constructs an application object with argc command line arguments in argv.

The global qApp pointer refers to this application object. Only one application object should be created.

This application object must be constructed before any paint devices (including widgets, pixmaps, bitmaps etc.).

All Qt programs automatically support the following command line options:

• -style= style, sets the application GUI style. Possible values depend on your system configuration. If you compiled Qt with additional styles or have additional styles as plugins these will be available to the -style command line option. You can also set the style for all Qt applications by setting the QT_STYLE_OVERRIDE environment variable.
• -style style, is the same as listed above.
• -stylesheet= stylesheet, sets the application styleSheet. The value must be a path to a file that contains the Style Sheet.

  Note: Relative URLs in the Style Sheet file are relative to the Style Sheet file's path.

• -stylesheet stylesheet, is the same as listed above.
• -widgetcount, prints debug message at the end about number of widgets left undestroyed and maximum number of widgets existed at the same time
• -reverse, sets the application's layout direction to Qt::RightToLeft
• -qmljsdebugger=, activates the QML/JS debugger with a specified port. The value must be of format port:1234[,block], where block is optional and will make the application wait until a debugger connects to it.

See also QCoreApplication::arguments().

[virtual noexcept] QApplication::~QApplication()

Cleans up any window system resources that were allocated by this application. Sets the global variable qApp to nullptr.

[static slot] void QApplication::aboutQt()

Displays a simple message box about Qt. The message includes the version number of Qt being used by the application.

This is useful for inclusion in the Help menu of an application, as shown in the Menus example.

This function is a convenience slot for QMessageBox::aboutQt().

[static] QWidget *QApplication::activeModalWidget()

Returns the active modal widget.

A modal widget is a special top-level widget which is a subclass of QDialog that specifies the modal parameter of the constructor as true. A modal widget must be closed before the user can continue with other parts of the program.

Modal widgets are organized in a stack. This function returns the active modal widget at the top of the stack.

See also activePopupWidget() and topLevelWidgets().

[static] QWidget *QApplication::activePopupWidget()

Returns the active popup widget.

A popup widget is a special top-level widget that sets the Qt::WType_Popup widget flag, e.g. the QMenu widget. When the application opens a popup widget, all events are sent to the popup. Normal widgets and modal widgets cannot be accessed before the popup widget is closed.

Only other popup widgets may be opened when a popup widget is shown. The popup widgets are organized in a stack. This function returns the active popup widget at the top of the stack.

See also activeModalWidget() and topLevelWidgets().

[static] QWidget *QApplication::activeWindow()

Returns the application top-level window that has the keyboard input focus, or nullptr if no application window has the focus. There might be an activeWindow() even if there is no focusWidget(), for example if no widget in that window accepts key events.

See also QWidget::setFocus(), QWidget::hasFocus(), and focusWidget().

[static] void QApplication::alert(QWidget *widget, int msec = 0)

Causes an alert to be shown for widget if the window is not the active window. The alert is shown for msec milliseconds. If msec is zero (the default), then the alert is shown indefinitely until the window becomes active again.

Currently this function does nothing on Qt for Embedded Linux.

On macOS, this works more at the application level and will cause the application icon to bounce in the dock.

On Windows, this causes the window's taskbar entry to flash for a time. If msec is zero, the flashing will stop and the taskbar entry will turn a different color (currently orange).

On X11, this will cause the window to be marked as "demands attention", the window must not be hidden (i.e. not have hide() called on it, but be visible in some sort of way) in order for this to work.

[static] QWidgetList QApplication::allWidgets()

Returns a list of all the widgets in the application.

The list is empty (QList::isEmpty()) if there are no widgets.

Example:

void updateAllWidgets()
{
    const QWidgetList allWidgets = QApplication::allWidgets();
    for (QWidget *widget : allWidgets)
        widget->update();
}

See also topLevelWidgets() and QWidget::isVisible().

[static] void QApplication::beep()

Sounds the bell, using the default volume and sound. The function is not available in Qt for Embedded Linux.

[static slot] void QApplication::closeAllWindows()

Closes all top-level windows.

This function is particularly useful for applications with many top-level windows.

The windows are closed in random order, until one window does not accept the close event. The application quits when the last window was successfully closed, unless quitOnLastWindowClosed is set to false. To trigger application termination from e.g. a menu, use QCoreApplication::quit() instead of this function.

See also quitOnLastWindowClosed, lastWindowClosed(), QWidget::close(), QWidget::closeEvent(), lastWindowClosed(), QCoreApplication::quit(), topLevelWidgets(), and QWidget::isWindow().

[override virtual protected] bool QApplication::event(QEvent *e)

[static] int QApplication::exec()

Enters the main event loop and waits until exit() is called, then returns the value that was set to exit() (which is 0 if exit() is called via quit()).

It is necessary to call this function to start event handling. The main event loop receives events from the window system and dispatches these to the application widgets.

Generally, no user interaction can take place before calling exec(). As a special case, modal widgets like QMessageBox can be used before calling exec(), because modal widgets call exec() to start a local event loop.

To make your application perform idle processing, i.e., executing a special function whenever there are no pending events, use a QChronoTimer with 0ns timeout. More advanced idle processing schemes can be achieved using processEvents().

We recommend that you connect clean-up code to the aboutToQuit() signal, instead of putting it in your application's main() function. This is because, on some platforms the QApplication::exec() call may not return. For example, on the Windows platform, when the user logs off, the system terminates the process after Qt closes all top-level windows. Hence, there is no guarantee that the application will have time to exit its event loop and execute code at the end of the main() function, after the QApplication::exec() call.

See also quitOnLastWindowClosed, QCoreApplication::quit(), QCoreApplication::exit(), QCoreApplication::processEvents(), and QCoreApplication::exec().

[signal] void QApplication::focusChanged(QWidget *old, QWidget *now)

This signal is emitted when the widget that has keyboard focus changed from old to now, i.e., because the user pressed the tab-key, clicked into a widget or changed the active window. Both old and now can be nullptr.

The signal is emitted after both widget have been notified about the change through QFocusEvent.

See also QWidget::setFocus(), QWidget::clearFocus(), and Qt::FocusReason.

[static] QWidget *QApplication::focusWidget()

Returns the application widget that has the keyboard input focus, or nullptr if no widget in this application has the focus.

See also QWidget::setFocus(), QWidget::hasFocus(), activeWindow(), and focusChanged().

[static] QFont QApplication::font()

Returns the default application font.

See also setFont(), fontMetrics(), and QWidget::font().

[static] QFont QApplication::font(const QWidget *widget)

This is an overloaded function.

Returns the default font for the widget. If a default font was not registered for the widget's class, it returns the default font of its nearest registered superclass.

See also fontMetrics(), setFont(), and QWidget::setFont().

[static] QFont QApplication::font(const char *className)

This is an overloaded function.

Returns the font for widgets of the given className.

See also setFont() and QWidget::font().

[static] bool QApplication::isEffectEnabled(Qt::UIEffect effect)

Returns true if effect is enabled; otherwise returns false.

By default, Qt will try to use the desktop settings. To prevent this, call setDesktopSettingsAware(false).

See also setEffectEnabled() and Qt::UIEffect.

[static] Qt::NavigationMode QApplication::navigationMode()

Returns what kind of focus navigation Qt is using.

This feature is available in Qt for Embedded Linux only.

See also setNavigationMode().

[override virtual] bool QApplication::notify(QObject *receiver, QEvent *e)

[static] QPalette QApplication::palette(const QWidget *widget)

If a widget is passed, the default palette for the widget's class is returned. This may or may not be the application palette. In most cases there is no special palette for certain types of widgets, but one notable exception is the popup menu under Windows, if the user has defined a special background color for menus in the display settings.

See also setPalette() and QWidget::palette().

[static] QPalette QApplication::palette(const char *className)

This is an overloaded function.

Returns the palette for widgets of the given className.

See also setPalette() and QWidget::palette().

[static] void QApplication::setEffectEnabled(Qt::UIEffect effect, bool enable = true)

Enables the UI effect effect if enable is true, otherwise the effect will not be used.

See also isEffectEnabled(), Qt::UIEffect, and setDesktopSettingsAware().

[static] void QApplication::setFont(const QFont &font, const char *className = nullptr)

Changes the default application font to font. If className is passed, the change applies only to classes that inherit className (as reported by QObject::inherits()).

On application start-up, the default font depends on the window system. It can vary depending on both the window system version and the locale. This function lets you override the default font; but overriding may be a bad idea because, for example, some locales need extra large fonts to support their special characters.

See also font(), fontMetrics(), and QWidget::setFont().

[static] void QApplication::setNavigationMode(Qt::NavigationMode mode)

Sets the kind of focus navigation Qt should use to mode.

This feature is available in Qt for Embedded Linux only.

See also navigationMode().

[static] void QApplication::setPalette(const QPalette &palette, const char *className = nullptr)

Changes the application palette to palette.

If className is passed, the change applies only to widgets that inherit className (as reported by QObject::inherits()). If className is left 0, the change affects all widgets, thus overriding any previously set class specific palettes.

The palette may be changed according to the current GUI style in QStyle::polish().

See also QWidget::setPalette(), palette(), and QStyle::polish().

[static] void QApplication::setStyle(QStyle *style)

Sets the application's GUI style to style. Ownership of the style object is transferred to QApplication, so QApplication will delete the style object on application exit or when a new style is set and the old style is still the parent of the application object.

Example usage:

QApplication::setStyle(QStyleFactory::create("Fusion"));

When switching application styles, the color palette is set back to the initial colors or the system defaults. This is necessary since certain styles have to adapt the color palette to be fully style-guide compliant.

Setting the style before a palette has been set, i.e., before creating QApplication, will cause the application to use QStyle::standardPalette() for the palette.

See also style(), QStyle, setPalette(), and desktopSettingsAware().

[static] QStyle *QApplication::setStyle(const QString &style)

This is an overloaded function.

Requests a QStyle object for style from the QStyleFactory.

The string must be one of the QStyleFactory::keys(), typically one of "windows", "windowsvista", "fusion", or "macos". Style names are case insensitive.

Returns nullptr if an unknown style is passed, otherwise the QStyle object returned is set as the application's GUI style.

[static] QStyle *QApplication::style()

Returns the application's style object.

See also setStyle() and QStyle.

[static] QWidget *QApplication::topLevelAt(const QPoint &point)

Returns the top-level widget at the given point; returns nullptr if there is no such widget.

[static] QWidget *QApplication::topLevelAt(int x, int y)

This is an overloaded function.

Returns the top-level widget at the point (x, y); returns 0 if there is no such widget.

[static] QWidgetList QApplication::topLevelWidgets()

Returns a list of the top-level widgets (windows) in the application.

Example:

void showAllHiddenTopLevelWidgets()
{
    const QWidgetList topLevelWidgets = QApplication::topLevelWidgets();
    for (QWidget *widget : topLevelWidgets) {
        if (widget->isHidden())
            widget->show();
    }
}

See also allWidgets(), QWidget::isWindow(), and QWidget::isHidden().

[static] QWidget *QApplication::widgetAt(const QPoint &point)

Returns the widget at global screen position point, or nullptr if there is no Qt widget there.

This function can be slow.

See also QCursor::pos(), QWidget::grabMouse(), and QWidget::grabKeyboard().

[static] QWidget *QApplication::widgetAt(int x, int y)

This is an overloaded function.

Returns the widget at global screen position (x, y), or nullptr if there is no Qt widget there.