class QStaticText¶

The QStaticText class enables optimized drawing of text when the text and its layout is updated rarely. More…

Synopsis¶

Methods¶

def __init__()
def __ne__()
def __eq__()
def performanceHint()
def prepare()
def setPerformanceHint()
def setText()
def setTextFormat()
def setTextOption()
def setTextWidth()
def size()
def swap()
def text()
def textFormat()
def textOption()
def textWidth()

Note

This documentation may contain snippets that were automatically translated from C++ to Python. We always welcome contributions to the snippet translation. If you see an issue with the translation, you can also let us know by creating a ticket on https:/bugreports.qt.io/projects/PYSIDE

Detailed Description¶

QStaticText provides a way to cache layout data for a block of text so that it can be drawn more efficiently than by using drawText() in which the layout information is recalculated with every call.

The class primarily provides an optimization for cases where the text, its font and the transformations on the painter are static over several paint events. If the text or its layout is changed for every iteration, drawText() is the more efficient alternative, since the static text’s layout would have to be recalculated to take the new state into consideration.

Translating the painter will not cause the layout of the text to be recalculated, but will cause a very small performance impact on drawStaticText(). Altering any other parts of the painter’s transformation or the painter’s font will cause the layout of the static text to be recalculated. This should be avoided as often as possible to maximize the performance benefit of using QStaticText .

In addition, only affine transformations are supported by drawStaticText(). Calling drawStaticText() on a projected painter will perform slightly worse than using the regular drawText() call, so this should be avoided.

class MyWidget: public QWidget
{
public:
    MyWidget(QWidget *parent = nullptr) : QWidget(parent), m_staticText("This is static text")

protected:
    void paintEvent(QPaintEvent *)
    {
        QPainter painter(this);
        painter.drawStaticText(0, 0, m_staticText);
    }

private:
    QStaticText m_staticText;
};

The QStaticText class can be used to mimic the behavior of drawText() to a specific point with no boundaries, and also when drawText() is called with a bounding rectangle.

If a bounding rectangle is not required, create a QStaticText object without setting a preferred text width. The text will then occupy a single line.

If you set a text width on the QStaticText object, this will bound the text. The text will be formatted so that no line exceeds the given width. The text width set for QStaticText will not automatically be used for clipping. To achieve clipping in addition to line breaks, use setClipRect() . The position of the text is decided by the argument passed to drawStaticText() and can change from call to call with a minimal impact on performance.

For extra convenience, it is possible to apply formatting to the text using the HTML subset supported by QTextDocument . QStaticText will attempt to guess the format of the input text using mightBeRichText() , and interpret it as rich text if this function returns true. To force QStaticText to display its contents as either plain text or rich text, use the function setTextFormat() and pass in, respectively, Qt::PlainText and Qt::RichText.

QStaticText can only represent text, so only HTML tags which alter the layout or appearance of the text will be respected. Adding an image to the input HTML, for instance, will cause the image to be included as part of the layout, affecting the positions of the text glyphs, but it will not be displayed. The result will be an empty area the size of the image in the output. Similarly, using tables will cause the text to be laid out in table format, but the borders will not be drawn.

If it’s the first time the static text is drawn, or if the static text, or the painter’s font has been altered since the last time it was drawn, the text’s layout has to be recalculated. On some paint engines, changing the matrix of the painter will also cause the layout to be recalculated. In particular, this will happen for any engine except for the OpenGL2 paint engine. Recalculating the layout will impose an overhead on the drawStaticText() call where it occurs. To avoid this overhead in the paint event, you can call prepare() ahead of time to ensure that the layout is calculated.

See also

drawText() drawStaticText() QTextLayout QTextDocument

class PerformanceHint¶

This enum the different performance hints that can be set on the QStaticText . These hints can be used to indicate that the QStaticText should use additional caches, if possible, to improve performance at the expense of memory. In particular, setting the performance hint AggressiveCaching on the QStaticText will improve performance when using the OpenGL graphics system or when drawing to a QOpenGLWidget.

Constant

Description

QStaticText.ModerateCaching

Do basic caching for high performance at a low memory cost.

QStaticText.AggressiveCaching

Use additional caching when available. This may improve performance at a higher memory cost.

Constant	Description
QStaticText.ModerateCaching	Do basic caching for high performance at a low memory cost.
QStaticText.AggressiveCaching	Use additional caching when available. This may improve performance at a higher memory cost.

__init__()¶

Constructs an empty QStaticText

__init__(other)

Parameters:: other – QStaticText

Constructs a QStaticText object which is a copy of other.

__init__(text)

Parameters:: text – str

Constructs a QStaticText object with the given text.

__ne__(arg__1)¶

Parameters:: arg__1 – QStaticText
Return type:: bool

Compares other to this QStaticText . Returns true if the texts, fonts or maximum sizes are different.

__eq__(arg__1)¶

Parameters:: arg__1 – QStaticText
Return type:: bool

Compares other to this QStaticText . Returns true if the texts, fonts and text widths are equal.

performanceHint()¶

Return type:: PerformanceHint

Returns which performance hint is set for the QStaticText .

See also

setPerformanceHint()

prepare([matrix=QTransform()[, font=QFont()]])¶

Parameters:

matrix – QTransform
font – QFont

Prepares the QStaticText object for being painted with the given matrix and the given font to avoid overhead when the actual drawStaticText() call is made.

When drawStaticText() is called, the layout of the QStaticText will be recalculated if any part of the QStaticText object has changed since the last time it was drawn. It will also be recalculated if the painter’s font is not the same as when the QStaticText was last drawn, or, on any other paint engine than the OpenGL2 engine, if the painter’s matrix has been altered since the static text was last drawn.

To avoid the overhead of creating the layout the first time you draw the QStaticText after making changes, you can use the prepare() function and pass in the matrix and font you expect to use when drawing the text.

See also

setFont() setWorldTransform()

setPerformanceHint(performanceHint)¶

Parameters:: performanceHint – PerformanceHint

Sets the performance hint of the QStaticText according to the performanceHint provided. The performanceHint is used to customize how much caching is done internally to improve performance.

The default is ModerateCaching .

Note

This function will cause the layout of the text to require recalculation.

See also

performanceHint()

setText(text)¶

Parameters:: text – str

Sets the text of the QStaticText to text.

Note

This function will cause the layout of the text to require recalculation.

See also

text()

setTextFormat(textFormat)¶

Parameters:: textFormat – TextFormat

Sets the text format of the QStaticText to textFormat. If textFormat is set to Qt::AutoText (the default), the format of the text will try to be determined using the function mightBeRichText() . If the text format is Qt::PlainText, then the text will be displayed as is, whereas it will be interpreted as HTML if the format is Qt::RichText. HTML tags that alter the font of the text, its color, or its layout are supported by QStaticText .

Note

This function will cause the layout of the text to require recalculation.

See also

textFormat() setText() text()

setTextOption(textOption)¶

Parameters:: textOption – QTextOption

Sets the text option structure that controls the layout process to the given textOption.

See also

textOption()

setTextWidth(textWidth)¶

Parameters:: textWidth – float

Sets the preferred width for this QStaticText . If the text is wider than the specified width, it will be broken into multiple lines and grow vertically. If the text cannot be split into multiple lines, it will be larger than the specified textWidth.

Setting the preferred text width to a negative number will cause the text to be unbounded.

Use size() to get the actual size of the text.

Note

This function will cause the layout of the text to require recalculation.

See also

textWidth() size()

size()¶

Return type:: QSizeF

Returns the size of the bounding rect for this QStaticText .

See also

textWidth()

swap(other)¶

Parameters:: other – QStaticText

Swaps this static text instance with other. This function is very fast and never fails.

text()¶

Return type:: str

Returns the text of the QStaticText .

See also

setText()

textFormat()¶

Return type:: TextFormat

Returns the text format of the QStaticText .

See also

setTextFormat() setText() text()

textOption()¶

Return type:: QTextOption

Returns the current text option used to control the layout process.

See also

setTextOption()

textWidth()¶

Return type:: float

Returns the preferred width for this QStaticText .

See also

setTextWidth()