class QTextEdit¶

The QTextEdit class provides a widget that is used to edit and display both plain and rich text. More…

Inherited by: QTextBrowser

Synopsis¶

Properties¶

acceptRichTextᅟ - Whether the text edit accepts rich text insertions by the user
autoFormattingᅟ - The enabled set of auto formatting features
cursorWidthᅟ
documentᅟ - The underlying document of the text editor
documentTitleᅟ - The title of the document parsed from the text
htmlᅟ
lineWrapColumnOrWidthᅟ - The position (in pixels or columns depending on the wrap mode) where text will be wrapped
lineWrapModeᅟ - The line wrap mode
markdownᅟ
overwriteModeᅟ - Whether text entered by the user will overwrite existing text
placeholderTextᅟ - The editor placeholder text
plainTextᅟ - The text editor’s contents as plain text
readOnlyᅟ - Whether the text edit is read-only
tabChangesFocusᅟ - Whether Tab changes focus or is accepted as input
tabStopDistanceᅟ - The tab stop distance in pixels
textInteractionFlagsᅟ
undoRedoEnabledᅟ - Whether undo and redo are enabled

Methods¶

def __init__()
def acceptRichText()
def alignment()
def anchorAt()
def autoFormatting()
def canPaste()
def createStandardContextMenu()
def currentCharFormat()
def currentFont()
def cursorForPosition()
def cursorRect()
def cursorWidth()
def document()
def documentTitle()
def ensureCursorVisible()
def extraSelections()
def find()
def fontFamily()
def fontItalic()
def fontPointSize()
def fontUnderline()
def fontWeight()
def inputMethodQuery()
def isReadOnly()
def isUndoRedoEnabled()
def lineWrapColumnOrWidth()
def lineWrapMode()
def mergeCurrentCharFormat()
def moveCursor()
def overwriteMode()
def placeholderText()
def print_()
def setAcceptRichText()
def setAutoFormatting()
def setCurrentCharFormat()
def setCursorWidth()
def setDocument()
def setDocumentTitle()
def setExtraSelections()
def setLineWrapColumnOrWidth()
def setLineWrapMode()
def setOverwriteMode()
def setPlaceholderText()
def setReadOnly()
def setTabChangesFocus()
def setTabStopDistance()
def setTextCursor()
def setTextInteractionFlags()
def setUndoRedoEnabled()
def setWordWrapMode()
def tabChangesFocus()
def tabStopDistance()
def textBackgroundColor()
def textColor()
def textCursor()
def textInteractionFlags()
def toHtml()
def toMarkdown()
def toPlainText()
def wordWrapMode()
def zoomInF()

Slots¶

def append()
def clear()
def copy()
def cut()
def insertHtml()
def insertPlainText()
def paste()
def redo()
def scrollToAnchor()
def selectAll()
def setAlignment()
def setCurrentFont()
def setFontFamily()
def setFontItalic()
def setFontPointSize()
def setFontUnderline()
def setFontWeight()
def setHtml()
def setMarkdown()
def setPlainText()
def setText()
def setTextBackgroundColor()
def setTextColor()
def undo()
def zoomIn()
def zoomOut()

Signals¶

def copyAvailable()
def currentCharFormatChanged()
def cursorPositionChanged()
def redoAvailable()
def selectionChanged()
def textChanged()
def undoAvailable()

Note

This documentation may contain snippets that were automatically translated from C++ to Python. We always welcome contributions to the snippet translation. If you see an issue with the translation, you can also let us know by creating a ticket on https:/bugreports.qt.io/projects/PYSIDE

Detailed Description¶

Warning

This section contains snippets that were automatically translated from C++ to Python and may contain errors.

Introduction and Concepts¶

QTextEdit is an advanced WYSIWYG viewer/editor supporting rich text formatting using HTML-style tags, or Markdown format. It is optimized to handle large documents and to respond quickly to user input.

QTextEdit works on paragraphs and characters. A paragraph is a formatted string which is word-wrapped to fit into the width of the widget. By default when reading plain text, one newline signifies a paragraph. A document consists of zero or more paragraphs. The words in the paragraph are aligned in accordance with the paragraph’s alignment. Paragraphs are separated by hard line breaks. Each character within a paragraph has its own attributes, for example, font and color.

QTextEdit can display images, lists and tables. If the text is too large to view within the text edit’s viewport, scroll bars will appear. The text edit can load both plain text and rich text files. Rich text can be described using a subset of HTML 4 markup; refer to the Supported HTML Subset page for more information.

If you just need to display a small piece of rich text use QLabel .

The rich text support in Qt is designed to provide a fast, portable and efficient way to add reasonable online help facilities to applications, and to provide a basis for rich text editors. If you find the HTML support insufficient for your needs you may consider the use of Qt WebKit, which provides a full-featured web browser widget.

The shape of the mouse cursor on a QTextEdit is Qt::IBeamCursor by default. It can be changed through the viewport() ‘s cursor property.

Using QTextEdit as a Display Widget¶

QTextEdit can display a large HTML subset, including tables and images.

The text can be set or replaced using setHtml() which deletes any existing text and replaces it with the text passed in the setHtml() call. If you call setHtml() with legacy HTML, and then call toHtml() , the text that is returned may have different markup, but will render the same. The entire text can be deleted with clear() .

Text can also be set or replaced using setMarkdown() , and the same caveats apply: if you then call toMarkdown() , the text that is returned may be different, but the meaning is preserved as much as possible. Markdown with some embedded HTML can be parsed, with the same limitations that setHtml() has; but toMarkdown() only writes “pure” Markdown, without any embedded HTML.

Text itself can be inserted using the QTextCursor class or using the convenience functions insertHtml() , insertPlainText() , append() or paste() . QTextCursor is also able to insert complex objects like tables or lists into the document, and it deals with creating selections and applying changes to selected text.

By default the text edit wraps words at whitespace to fit within the text edit widget. The setLineWrapMode() function is used to specify the kind of line wrap you want, or NoWrap if you don’t want any wrapping. Call setLineWrapMode() to set a fixed pixel width FixedPixelWidth , or character column (e.g. 80 column) FixedColumnWidth with the pixels or columns specified with setLineWrapColumnOrWidth() . If you use word wrap to the widget’s width WidgetWidth , you can specify whether to break on whitespace or anywhere with setWordWrapMode() .

The find() function can be used to find and select a given string within the text.

If you want to limit the total number of paragraphs in a QTextEdit , as for example it is often useful in a log viewer, then you can use QTextDocument’s maximumBlockCount property for that.

Read-only Key Bindings¶

When QTextEdit is used read-only the key bindings are limited to navigation, and text may only be selected with the mouse:

Keypresses

Action

Up

Moves one line up.

Down

Moves one line down.

Left

Moves one character to the left.

Right

Moves one character to the right.

PageUp

Moves one (viewport) page up.

PageDown

Moves one (viewport) page down.

Home

Moves to the beginning of the text.

End

Moves to the end of the text.

Alt+Wheel

Scrolls the page horizontally (the Wheel is the mouse wheel).

Ctrl+Wheel

Zooms the text.

Ctrl+A

Selects all text.

Keypresses	Action
Up	Moves one line up.
Down	Moves one line down.
Left	Moves one character to the left.
Right	Moves one character to the right.
PageUp	Moves one (viewport) page up.
PageDown	Moves one (viewport) page down.
Home	Moves to the beginning of the text.
End	Moves to the end of the text.
Alt+Wheel	Scrolls the page horizontally (the Wheel is the mouse wheel).
Ctrl+Wheel	Zooms the text.
Ctrl+A	Selects all text.

The text edit may be able to provide some meta-information. For example, the documentTitle() function will return the text from within HTML <title> tags.

Note

Zooming into HTML documents only works if the font-size is not set to a fixed size.

Using QTextEdit as an Editor¶

All the information about using QTextEdit as a display widget also applies here.

The current char format’s attributes are set with setFontItalic() , setFontWeight() , setFontUnderline() , setFontFamily() , setFontPointSize() , setTextColor() and setCurrentFont() . The current paragraph’s alignment is set with setAlignment() .

Selection of text is handled by the QTextCursor class, which provides functionality for creating selections, retrieving the text contents or deleting selections. You can retrieve the object that corresponds with the user-visible cursor using the textCursor() method. If you want to set a selection in QTextEdit just create one on a QTextCursor object and then make that cursor the visible cursor using setTextCursor() . The selection can be copied to the clipboard with copy() , or cut to the clipboard with cut() . The entire text can be selected using selectAll() .

When the cursor is moved and the underlying formatting attributes change, the currentCharFormatChanged() signal is emitted to reflect the new attributes at the new cursor position.

The textChanged() signal is emitted whenever the text changes (as a result of setText() or through the editor itself).

QTextEdit holds a QTextDocument object which can be retrieved using the document() method. You can also set your own document object using setDocument() .

QTextDocument provides an isModified() function which will return true if the text has been modified since it was either loaded or since the last call to setModified with false as argument. In addition it provides methods for undo and redo.

Drag and Drop¶

QTextEdit also supports custom drag and drop behavior. By default, QTextEdit will insert plain text, HTML and rich text when the user drops data of these MIME types onto a document. Reimplement canInsertFromMimeData() and insertFromMimeData() to add support for additional MIME types.

For example, to allow the user to drag and drop an image onto a QTextEdit , you could the implement these functions in the following way:

def canInsertFromMimeData(self, QMimeData source ):

    if source.hasImage():
        return True
else:
        return QTextEdit.canInsertFromMimeData(source)

We add support for image MIME types by returning true. For all other MIME types, we use the default implementation.

def insertFromMimeData(self, source):

    if source.hasImage():

        image = QImage(source.imageData())
        cursor = self.textCursor()
        document = self.document()
        document.addResource(QTextDocument.ImageResource, QUrl("image"), image)
        cursor.insertImage("image")

We unpack the image from the QVariant held by the MIME source and insert it into the document as a resource.

Editing Key Bindings¶

The list of key bindings which are implemented for editing:

Keypresses

Action

Backspace

Deletes the character to the left of the cursor.

Delete

Deletes the character to the right of the cursor.

Ctrl+C

Copy the selected text to the clipboard.

Ctrl+Insert

Copy the selected text to the clipboard.

Ctrl+K

Deletes to the end of the line.

Ctrl+V

Pastes the clipboard text into text edit.

Shift+Insert

Pastes the clipboard text into text edit.

Ctrl+X

Deletes the selected text and copies it to the clipboard.

Shift+Delete

Deletes the selected text and copies it to the clipboard.

Ctrl+Z

Undoes the last operation.

Ctrl+Y

Redoes the last operation.

Left

Moves the cursor one character to the left.

Ctrl+Left

Moves the cursor one word to the left.

Right

Moves the cursor one character to the right.

Ctrl+Right

Moves the cursor one word to the right.

Up

Moves the cursor one line up.

Down

Moves the cursor one line down.

PageUp

Moves the cursor one page up.

PageDown

Moves the cursor one page down.

Home

Moves the cursor to the beginning of the line.

Ctrl+Home

Moves the cursor to the beginning of the text.

End

Moves the cursor to the end of the line.

Ctrl+End

Moves the cursor to the end of the text.

Alt+Wheel

Scrolls the page horizontally (the Wheel is the mouse wheel).

Keypresses	Action
Backspace	Deletes the character to the left of the cursor.
Delete	Deletes the character to the right of the cursor.
Ctrl+C	Copy the selected text to the clipboard.
Ctrl+Insert	Copy the selected text to the clipboard.
Ctrl+K	Deletes to the end of the line.
Ctrl+V	Pastes the clipboard text into text edit.
Shift+Insert	Pastes the clipboard text into text edit.
Ctrl+X	Deletes the selected text and copies it to the clipboard.
Shift+Delete	Deletes the selected text and copies it to the clipboard.
Ctrl+Z	Undoes the last operation.
Ctrl+Y	Redoes the last operation.
Left	Moves the cursor one character to the left.
Ctrl+Left	Moves the cursor one word to the left.
Right	Moves the cursor one character to the right.
Ctrl+Right	Moves the cursor one word to the right.
Up	Moves the cursor one line up.
Down	Moves the cursor one line down.
PageUp	Moves the cursor one page up.
PageDown	Moves the cursor one page down.
Home	Moves the cursor to the beginning of the line.
Ctrl+Home	Moves the cursor to the beginning of the text.
End	Moves the cursor to the end of the line.
Ctrl+End	Moves the cursor to the end of the text.
Alt+Wheel	Scrolls the page horizontally (the Wheel is the mouse wheel).

To select (mark) text hold down the Shift key whilst pressing one of the movement keystrokes, for example, Shift+Right will select the character to the right, and Shift+Ctrl+Right will select the word to the right, etc.

See also

Syntax Highlighter Example Rich Text Processing

class LineWrapMode¶

Constant	Description
QTextEdit.NoWrap
QTextEdit.WidgetWidth
QTextEdit.FixedPixelWidth
QTextEdit.FixedColumnWidth

class AutoFormattingFlag¶

Constant	Description
QTextEdit.AutoNone	(inherits `enum.Flag`) Don’t do any automatic formatting.
QTextEdit.AutoBulletList	Automatically create bullet lists (e.g. when the user enters an asterisk (’*’) in the left most column, or presses Enter in an existing list item.
QTextEdit.AutoAll	Apply all automatic formatting. Currently only automatic bullet lists are supported.

Note

Properties can be used directly when from __feature__ import true_property is used or via accessor functions otherwise.

property acceptRichTextᅟ: bool¶

This property holds whether the text edit accepts rich text insertions by the user.

When this property is set to false text edit will accept only plain text input from the user. For example through clipboard or drag and drop.

This property’s default is true.

Access functions:

acceptRichText()
setAcceptRichText()

property autoFormattingᅟ: Combination of QTextEdit.AutoFormattingFlag¶

This property holds the enabled set of auto formatting features.

The value can be any combination of the values in the AutoFormattingFlag enum. The default is AutoNone . Choose AutoAll to enable all automatic formatting.

Currently, the only automatic formatting feature provided is AutoBulletList ; future versions of Qt may offer more.

Access functions:

autoFormatting()
setAutoFormatting()

property cursorWidthᅟ: int¶

This property specifies the width of the cursor in pixels. The default value is 1.

Access functions:

cursorWidth()
setCursorWidth()

property documentᅟ: QTextDocument¶

This property holds the underlying document of the text editor..

Note

The editor does not take ownership of the document unless it is the document’s parent object. The parent object of the provided document remains the owner of the object. If the previously assigned document is a child of the editor then it will be deleted.

Access functions:

document()
setDocument()

property documentTitleᅟ: str¶

This property holds the title of the document parsed from the text..

By default, for a newly-created, empty document, this property contains an empty string.

Access functions:

documentTitle()
setDocumentTitle()

property htmlᅟ: str¶

This property provides an HTML interface to the text of the text edit.

toHtml() returns the text of the text edit as html.

setHtml() changes the text of the text edit. Any previous text is removed and the undo/redo history is cleared. The input text is interpreted as rich text in html format. currentCharFormat() is also reset, unless textCursor() is already at the beginning of the document.

Note

It is the responsibility of the caller to make sure that the text is correctly decoded when a QString containing HTML is created and passed to setHtml().

By default, for a newly-created, empty document, this property contains text to describe an HTML 4.0 document with no body text.

See also

plainText

Access functions:

toHtml()
setHtml()
Signal textChanged()

property lineWrapColumnOrWidthᅟ: int¶

This property holds the position (in pixels or columns depending on the wrap mode) where text will be wrapped.

If the wrap mode is FixedPixelWidth , the value is the number of pixels from the left edge of the text edit at which text should be wrapped. If the wrap mode is FixedColumnWidth , the value is the column number (in character columns) from the left edge of the text edit at which text should be wrapped.

By default, this property contains a value of 0.

See also

lineWrapMode

Access functions:

lineWrapColumnOrWidth()
setLineWrapColumnOrWidth()

property lineWrapModeᅟ: QTextEdit.LineWrapMode¶

This property holds the line wrap mode.

The default mode is WidgetWidth which causes words to be wrapped at the right edge of the text edit. Wrapping occurs at whitespace, keeping whole words intact. If you want wrapping to occur within words use setWordWrapMode() . If you set a wrap mode of FixedPixelWidth or FixedColumnWidth you should also call setLineWrapColumnOrWidth() with the width you want.

See also

lineWrapColumnOrWidth

Access functions:

lineWrapMode()
setLineWrapMode()

property markdownᅟ: str¶

This property provides a Markdown interface to the text of the text edit.

toMarkdown() returns the text of the text edit as “pure” Markdown, without any embedded HTML formatting. Some features that QTextDocument supports (such as the use of specific colors and named fonts) cannot be expressed in “pure” Markdown, and they will be omitted.

setMarkdown() changes the text of the text edit. Any previous text is removed and the undo/redo history is cleared. The input text is interpreted as rich text in Markdown format.

Parsing of HTML included in the markdown string is handled in the same way as in setHtml ; however, Markdown formatting inside HTML blocks is not supported.

Some features of the parser can be enabled or disabled via the features argument:

MarkdownNoHTML

Any HTML tags in the Markdown text will be discarded

The default is MarkdownDialectGitHub.

See also

plainText html setMarkdown()

Access functions:

toMarkdown()
setMarkdown()
Signal textChanged()

property overwriteModeᅟ: bool¶

This property holds whether text entered by the user will overwrite existing text.

As with many text editors, the text editor widget can be configured to insert or overwrite existing text with new text entered by the user.

If this property is true, existing text is overwritten, character-for-character by new text; otherwise, text is inserted at the cursor position, displacing existing text.

By default, this property is false (new text does not overwrite existing text).

Access functions:

overwriteMode()
setOverwriteMode()

property placeholderTextᅟ: str¶

This property holds the editor placeholder text.

Setting this property makes the editor display a grayed-out placeholder text as long as the document() is empty.

By default, this property contains an empty string.

See also

document()

Access functions:

placeholderText()
setPlaceholderText()

property plainTextᅟ: str¶

This property holds the text editor’s contents as plain text..

Previous contents are removed and undo/redo history is reset when the property is set. currentCharFormat() is also reset, unless textCursor() is already at the beginning of the document.

If the text edit has another content type, it will not be replaced by plain text if you call toPlainText() . The only exception to this is the non-break space, nbsp;, that will be converted into standard space.

By default, for an editor with no contents, this property contains an empty string.

See also

html

Access functions:

toPlainText()
setPlainText()

property readOnlyᅟ: bool¶

This property holds whether the text edit is read-only.

In a read-only text edit the user can only navigate through the text and select text; modifying the text is not possible.

This property’s default is false.

Access functions:

isReadOnly()
setReadOnly()

property tabChangesFocusᅟ: bool¶

This property holds whether Tab changes focus or is accepted as input.

In some occasions text edits should not allow the user to input tabulators or change indentation using the Tab key, as this breaks the focus chain. The default is false.

Access functions:

tabChangesFocus()
setTabChangesFocus()

property tabStopDistanceᅟ: float¶

This property holds the tab stop distance in pixels.

By default, this property contains a value of 80 pixels.

Do not set a value less than the horizontalAdvance() of the QChar::VisualTabCharacter character, otherwise the tab-character will be drawn incompletely.

See also

defaultTextOption

Access functions:

tabStopDistance()
setTabStopDistance()

property textInteractionFlagsᅟ: Combination of Qt.TextInteractionFlag¶

Specifies how the widget should interact with user input.

The default value depends on whether the QTextEdit is read-only or editable, and whether it is a QTextBrowser or not.

Access functions:

textInteractionFlags()
setTextInteractionFlags()

property undoRedoEnabledᅟ: bool¶

This property holds whether undo and redo are enabled..

Users are only able to undo or redo actions if this property is true, and if there is an action that can be undone (or redone).

Access functions:

isUndoRedoEnabled()
setUndoRedoEnabled()

__init__([parent=None])¶

Parameters:: parent – QWidget

Constructs an empty QTextEdit with parent parent.

__init__(text[, parent=None])

Parameters:

text – str
parent – QWidget

Constructs a QTextEdit with parent parent. The text edit will display the text text. The text is interpreted as html.

acceptRichText()¶

Return type:: bool

See also

setAcceptRichText()

Getter of property acceptRichTextᅟ .

alignment()¶

Return type:: Combination of AlignmentFlag

Returns the alignment of the current paragraph.

See also

setAlignment()

anchorAt(pos)¶

Parameters:: pos – QPoint
Return type:: str

Returns the reference of the anchor at position pos, or an empty string if no anchor exists at that point.

append(text)¶

Parameters:: text – str

Appends a new paragraph with text to the end of the text edit.

Note

The new paragraph appended will have the same character format and block format as the current paragraph, determined by the position of the cursor.

See also

currentCharFormat() blockFormat()

autoFormatting()¶

Return type:: Combination of AutoFormattingFlag

See also

setAutoFormatting()

Getter of property autoFormattingᅟ .

canInsertFromMimeData(source)¶

Parameters:: source – QMimeData
Return type:: bool

This function returns true if the contents of the MIME data object, specified by source, can be decoded and inserted into the document. It is called for example when during a drag operation the mouse enters this widget and it is necessary to determine whether it is possible to accept the drag and drop operation.

Reimplement this function to enable drag and drop support for additional MIME types.

canPaste()¶

Return type:: bool

Returns whether text can be pasted from the clipboard into the textedit.

clear()¶

Deletes all the text in the text edit.

Notes:

The undo/redo history is also cleared.

currentCharFormat() is reset, unless textCursor() is already at the beginning of the document.

See also

cut() setPlainText() setHtml()

copy()¶

Copies any selected text to the clipboard.

See also

copyAvailable()

copyAvailable(b)¶

Parameters:: b – bool

This signal is emitted when text is selected or de-selected in the text edit.

When text is selected this signal will be emitted with yes set to true. If no text has been selected or if the selected text is de-selected this signal is emitted with yes set to false.

If yes is true then copy() can be used to copy the selection to the clipboard. If yes is false then copy() does nothing.

See also

selectionChanged()

createMimeDataFromSelection()¶

Return type:: QMimeData

This function returns a new MIME data object to represent the contents of the text edit’s current selection. It is called when the selection needs to be encapsulated into a new QMimeData object; for example, when a drag and drop operation is started, or when data is copied to the clipboard.

If you reimplement this function, note that the ownership of the returned QMimeData object is passed to the caller. The selection can be retrieved by using the textCursor() function.

createStandardContextMenu()¶

Return type:: QMenu

We recommend that you use the createStandardContextMenu(QPoint) version instead which will enable the actions that are sensitive to where the user clicked.

createStandardContextMenu(position)

Parameters:: position – QPoint
Return type:: QMenu

This function creates the standard context menu which is shown when the user clicks on the text edit with the right mouse button. It is called from the default contextMenuEvent() handler and it takes the position in document coordinates where the mouse click was. This can enable actions that are sensitive to the position where the user clicked. The popup menu’s ownership is transferred to the caller.

currentCharFormat()¶

Return type:: QTextCharFormat

Returns the char format that is used when inserting new text.

See also

setCurrentCharFormat()

currentCharFormatChanged(format)¶

Parameters:: format – QTextCharFormat

This signal is emitted if the current character format has changed, for example caused by a change of the cursor position.

The new format is f.

See also

setCurrentCharFormat()

currentFont()¶

Return type:: QFont

Returns the font of the current format.

See also

setCurrentFont() setFontFamily() setFontPointSize()

cursorForPosition(pos)¶

Parameters:: pos – QPoint
Return type:: QTextCursor

returns a QTextCursor at position pos (in viewport coordinates).

cursorPositionChanged()¶

This signal is emitted whenever the position of the cursor changed.

cursorRect()¶

Return type:: QRect

returns a rectangle (in viewport coordinates) that includes the cursor of the text edit.

cursorRect(cursor)

Parameters:: cursor – QTextCursor
Return type:: QRect

returns a rectangle (in viewport coordinates) that includes the cursor.

cursorWidth()¶

Return type:: int

See also

setCursorWidth()

Getter of property cursorWidthᅟ .

cut()¶

Copies the selected text to the clipboard and deletes it from the text edit.

If there is no selected text nothing happens.

See also

copy() paste()

doSetTextCursor(cursor)¶

Parameters:: cursor – QTextCursor

document()¶

Return type:: QTextDocument

See also

setDocument()

Getter of property documentᅟ .

documentTitle()¶

Return type:: str

See also

setDocumentTitle()

Getter of property documentTitleᅟ .

ensureCursorVisible()¶

Ensures that the cursor is visible by scrolling the text edit if necessary.

extraSelections()¶

Return type:: .list of QTextEdit.ExtraSelection

Returns previously set extra selections.

See also

setExtraSelections()

find(exp[, options=QTextDocument.FindFlags()])¶

Parameters:

exp – QRegularExpression
options – Combination of FindFlag

Return type:

bool

This is an overloaded function.

Finds the next occurrence, matching the regular expression, exp, using the given options.

Returns true if a match was found and changes the cursor to select the match; otherwise returns false.

Warning

For historical reasons, the case sensitivity option set on exp is ignored. Instead, the options are used to determine if the search is case sensitive or not.

find(exp[, options=QTextDocument.FindFlags()])

Parameters:

exp – str
options – Combination of FindFlag

Return type:

bool

Finds the next occurrence of the string, exp, using the given options. Returns true if exp was found and changes the cursor to select the match; otherwise returns false.

fontFamily()¶

Return type:: str

Returns the font family of the current format.

See also

setFontFamily() setCurrentFont() setFontPointSize()

fontItalic()¶

Return type:: bool

Returns true if the font of the current format is italic; otherwise returns false.

See also

setFontItalic()

fontPointSize()¶

Return type:: float

Returns the point size of the font of the current format.

See also

setFontFamily() setCurrentFont() setFontPointSize()

fontUnderline()¶

Return type:: bool

Returns true if the font of the current format is underlined; otherwise returns false.

See also

setFontUnderline()

fontWeight()¶

Return type:: int

Returns the font weight of the current format.

See also

setFontWeight() setCurrentFont() setFontPointSize() Weight

inputMethodQuery(query, argument)¶

Parameters:

query – InputMethodQuery
argument – object

Return type:

object

insertFromMimeData(source)¶

Parameters:: source – QMimeData

This function inserts the contents of the MIME data object, specified by source, into the text edit at the current cursor position. It is called whenever text is inserted as the result of a clipboard paste operation, or when the text edit accepts data from a drag and drop operation.

Reimplement this function to enable drag and drop support for additional MIME types.

insertHtml(text)¶

Parameters:: text – str

Warning

This section contains snippets that were automatically translated from C++ to Python and may contain errors.

Convenience slot that inserts text which is assumed to be of html formatting at the current cursor position.

It is equivalent to:

edit.textCursor().insertHtml(fragment)

Note

When using this function with a style sheet, the style sheet will only apply to the current block in the document. In order to apply a style sheet throughout a document, use QTextDocument::setDefaultStyleSheet() instead.

insertPlainText(text)¶

Parameters:: text – str

Warning

This section contains snippets that were automatically translated from C++ to Python and may contain errors.

Convenience slot that inserts text at the current cursor position.

It is equivalent to

edit.textCursor().insertText(text)

isReadOnly()¶

Return type:: bool

Getter of property readOnlyᅟ .

isUndoRedoEnabled()¶

Return type:: bool

Getter of property undoRedoEnabledᅟ .

lineWrapColumnOrWidth()¶

Return type:: int

See also

setLineWrapColumnOrWidth()

Getter of property lineWrapColumnOrWidthᅟ .

lineWrapMode()¶

Return type:: LineWrapMode

See also

setLineWrapMode()

Getter of property lineWrapModeᅟ .

loadResource(type, name)¶

Parameters:

type – int
name – QUrl

Return type:

object

Loads the resource specified by the given type and name.

This function is an extension of QTextDocument::loadResource().

See also

loadResource()

mergeCurrentCharFormat(modifier)¶

Parameters:: modifier – QTextCharFormat

Merges the properties specified in modifier into the current character format by calling QTextCursor::mergeCharFormat on the editor’s cursor. If the editor has a selection then the properties of modifier are directly applied to the selection.

See also

mergeCharFormat()

moveCursor(operation[, mode=QTextCursor.MoveAnchor])¶

Parameters:

operation – MoveOperation
mode – MoveMode

Moves the cursor by performing the given operation.

If mode is QTextCursor::KeepAnchor, the cursor selects the text it moves over. This is the same effect that the user achieves when they hold down the Shift key and move the cursor with the cursor keys.

See also

movePosition()

overwriteMode()¶

Return type:: bool

See also

setOverwriteMode()

Getter of property overwriteModeᅟ .

paste()¶

Pastes the text from the clipboard into the text edit at the current cursor position.

If there is no text in the clipboard nothing happens.

To change the behavior of this function, i.e. to modify what QTextEdit can paste and how it is being pasted, reimplement the virtual canInsertFromMimeData() and insertFromMimeData() functions.

See also

cut() copy()

placeholderText()¶

Return type:: str

See also

setPlaceholderText()

Getter of property placeholderTextᅟ .

print_(printer)¶

Parameters:: printer – QPagedPaintDevice

redo()¶

Redoes the last operation.

If there is no operation to redo, i.e. there is no redo step in the undo/redo history, nothing happens.

See also

undo()

redoAvailable(b)¶

Parameters:: b – bool

This signal is emitted whenever redo operations become available (available is true) or unavailable (available is false).

scrollToAnchor(name)¶

Parameters:: name – str

Scrolls the text edit so that the anchor with the given name is visible; does nothing if the name is empty, or is already visible, or isn’t found.

selectAll()¶

Selects all text.

See also

copy() cut() textCursor()

selectionChanged()¶

This signal is emitted whenever the selection changes.

See also

copyAvailable()

setAcceptRichText(accept)¶

Parameters:: accept – bool

See also

acceptRichText()

Setter of property acceptRichTextᅟ .

setAlignment(a)¶

Parameters:: a – Combination of AlignmentFlag

Sets the alignment of the current paragraph to a. Valid alignments are Qt::AlignLeft, Qt::AlignRight, Qt::AlignJustify and Qt::AlignCenter (which centers horizontally).

See also

alignment()

setAutoFormatting(features)¶

Parameters:: features – Combination of AutoFormattingFlag

See also

autoFormatting()

Setter of property autoFormattingᅟ .

setCurrentCharFormat(format)¶

Parameters:: format – QTextCharFormat

Sets the char format that is be used when inserting new text to format by calling QTextCursor::setCharFormat() on the editor’s cursor. If the editor has a selection then the char format is directly applied to the selection.

See also

currentCharFormat()

setCurrentFont(f)¶

Parameters:: f – QFont

Sets the font of the current format to f.

See also

currentFont() setFontPointSize() setFontFamily()

setCursorWidth(width)¶

Parameters:: width – int

See also

cursorWidth()

Setter of property cursorWidthᅟ .

setDocument(document)¶

Parameters:: document – QTextDocument

See also

document()

Setter of property documentᅟ .

setDocumentTitle(title)¶

Parameters:: title – str

See also

documentTitle()

Setter of property documentTitleᅟ .

setExtraSelections(selections)¶

Parameters:: selections – .list of QTextEdit.ExtraSelection

This function allows temporarily marking certain regions in the document with a given color, specified as selections. This can be useful for example in a programming editor to mark a whole line of text with a given background color to indicate the existence of a breakpoint.

See also

ExtraSelection extraSelections()

setFontFamily(fontFamily)¶

Parameters:: fontFamily – str

Sets the font family of the current format to fontFamily.

See also

fontFamily() setCurrentFont()

setFontItalic(b)¶

Parameters:: b – bool

If italic is true, sets the current format to italic; otherwise sets the current format to non-italic.

See also

fontItalic()

setFontPointSize(s)¶

Parameters:: s – float

Sets the point size of the current format to s.

Note that if s is zero or negative, the behavior of this function is not defined.

See also

fontPointSize() setCurrentFont() setFontFamily()

setFontUnderline(b)¶

Parameters:: b – bool

If underline is true, sets the current format to underline; otherwise sets the current format to non-underline.

See also

fontUnderline()

setFontWeight(w)¶

Parameters:: w – int

Sets the font weight of the current format to the given weight, where the value used is in the range defined by the QFont::Weight enum.

See also

fontWeight() setCurrentFont() setFontFamily()

setHtml(text)¶

Parameters:: text – str

Setter of property htmlᅟ .

setLineWrapColumnOrWidth(w)¶

Parameters:: w – int

See also

lineWrapColumnOrWidth()

Setter of property lineWrapColumnOrWidthᅟ .

setLineWrapMode(mode)¶

Parameters:: mode – LineWrapMode

See also

lineWrapMode()

Setter of property lineWrapModeᅟ .

setMarkdown(markdown)¶

Parameters:: markdown – str

Setter of property markdownᅟ .

setOverwriteMode(overwrite)¶

Parameters:: overwrite – bool

See also

overwriteMode()

Setter of property overwriteModeᅟ .

setPlaceholderText(placeholderText)¶

Parameters:: placeholderText – str

See also

placeholderText()

Setter of property placeholderTextᅟ .

setPlainText(text)¶

Parameters:: text – str

Changes the text of the text edit to the string text. Any previous text is removed.

Notes:

text is interpreted as plain text.

The undo/redo history is also cleared.

currentCharFormat() is reset, unless textCursor() is already at the beginning of the document.

See also

toPlainText()

Setter of property plainTextᅟ .

setReadOnly(ro)¶

Parameters:: ro – bool

See also

isReadOnly()

Setter of property readOnlyᅟ .

setTabChangesFocus(b)¶

Parameters:: b – bool

See also

tabChangesFocus()

Setter of property tabChangesFocusᅟ .

setTabStopDistance(distance)¶

Parameters:: distance – float

See also

tabStopDistance()

Setter of property tabStopDistanceᅟ .

setText(text)¶

Parameters:: text – str

Sets the text edit’s text. The text can be plain text or HTML and the text edit will try to guess the right format.

Use setHtml() or setPlainText() directly to avoid text edit’s guessing.

See also

toPlainText() toHtml()

setTextBackgroundColor(c)¶

Parameters:: c – QColor

Sets the text background color of the current format to c.

See also

textBackgroundColor()

setTextColor(c)¶

Parameters:: c – QColor

Sets the text color of the current format to c.

See also

textColor()

setTextCursor(cursor)¶

Parameters:: cursor – QTextCursor

Sets the visible cursor.

See also

textCursor()

setTextInteractionFlags(flags)¶

Parameters:: flags – Combination of TextInteractionFlag

See also

textInteractionFlags()

Setter of property textInteractionFlagsᅟ .

setUndoRedoEnabled(enable)¶

Parameters:: enable – bool

See also

isUndoRedoEnabled()

Setter of property undoRedoEnabledᅟ .

setWordWrapMode(policy)¶

Parameters:: policy – WrapMode

See also

wordWrapMode()

tabChangesFocus()¶

Return type:: bool

See also

setTabChangesFocus()

Getter of property tabChangesFocusᅟ .

tabStopDistance()¶

Return type:: float

See also

setTabStopDistance()

Getter of property tabStopDistanceᅟ .

textBackgroundColor()¶

Return type:: QColor

Returns the text background color of the current format.

See also

setTextBackgroundColor()

textChanged()¶

This signal is emitted whenever the document’s content changes; for example, when text is inserted or deleted, or when formatting is applied.

Notification signal of property markdownᅟ .

textColor()¶

Return type:: QColor

Returns the text color of the current format.

See also

setTextColor()

textCursor()¶

Return type:: QTextCursor

Returns a copy of the QTextCursor that represents the currently visible cursor. Note that changes on the returned cursor do not affect QTextEdit ‘s cursor; use setTextCursor() to update the visible cursor.

See also

setTextCursor()

textInteractionFlags()¶

Return type:: Combination of TextInteractionFlag

See also

setTextInteractionFlags()

Getter of property textInteractionFlagsᅟ .

toHtml()¶

Return type:: str

Getter of property htmlᅟ .

toMarkdown([features=QTextDocument.MarkdownDialectGitHub])¶

Parameters:: features – Combination of MarkdownFeature
Return type:: str

toPlainText()¶

Return type:: str

QString QTextEdit::toPlainText() const

Returns the text of the text edit as plain text.

See also

setPlainText()

Getter of property plainTextᅟ .

undo()¶

Undoes the last operation.

If there is no operation to undo, i.e. there is no undo step in the undo/redo history, nothing happens.

See also

redo()

undoAvailable(b)¶

Parameters:: b – bool

This signal is emitted whenever undo operations become available (available is true) or unavailable (available is false).

wordWrapMode()¶

Return type:: WrapMode

See also

setWordWrapMode()

zoomIn([range=1])¶

Parameters:: range – int

Zooms in on the text by making the base font size range points larger and recalculating all font sizes to be the new size. This does not change the size of any images.

See also

zoomOut()

zoomInF(range)¶

Parameters:: range – float

zoomOut([range=1])¶

Parameters:: range – int

Zooms out on the text by making the base font size range points smaller and recalculating all font sizes to be the new size. This does not change the size of any images.

See also

zoomIn()