QScrollerProperties#

The QScrollerProperties class stores the settings for a QScroller . More…

Synopsis#

Functions#

def __ne__ (sp)
def __eq__ (sp)
def scrollMetric (metric)
def setScrollMetric (metric, value)

Static functions#

def setDefaultScrollerProperties (sp)
def unsetDefaultScrollerProperties ()

Note

This documentation may contain snippets that were automatically translated from C++ to Python. We always welcome contributions to the snippet translation. If you see an issue with the translation, you can also let us know by creating a ticket on https:/bugreports.qt.io/projects/PYSIDE

Detailed Description#

The QScrollerProperties class stores the parameters used by QScroller .

The default settings are platform dependent so that Qt emulates the platform behaviour for kinetic scrolling.

As a convention the QScrollerProperties are in physical units (meter, seconds) and are converted by QScroller using the current DPI.

See also

QScroller

class PySide6.QtWidgets.QScrollerProperties#

PySide6.QtWidgets.QScrollerProperties(sp)

Parameters:: sp – PySide6.QtWidgets.QScrollerProperties

Constructs new scroller properties.

Constructs a copy of sp.

PySide6.QtWidgets.QScrollerProperties.OvershootPolicy#

This enum describes the various modes of overshooting.

Constant

Description

QScrollerProperties.OvershootWhenScrollable

Overshooting is possible when the content is scrollable. This is the default.

QScrollerProperties.OvershootAlwaysOff

Overshooting is never enabled, even when the content is scrollable.

QScrollerProperties.OvershootAlwaysOn

Overshooting is always enabled, even when the content is not scrollable.

Constant	Description
QScrollerProperties.OvershootWhenScrollable	Overshooting is possible when the content is scrollable. This is the default.
QScrollerProperties.OvershootAlwaysOff	Overshooting is never enabled, even when the content is scrollable.
QScrollerProperties.OvershootAlwaysOn	Overshooting is always enabled, even when the content is not scrollable.

PySide6.QtWidgets.QScrollerProperties.FrameRates#

This enum describes the available frame rates used while dragging or scrolling.

Constant

Description

QScrollerProperties.Fps60

60 frames per second

QScrollerProperties.Fps30

30 frames per second

QScrollerProperties.Fps20

20 frames per second

QScrollerProperties.Standard

the default value is 60 frames per second (which corresponds to QAbstractAnimation ).

Constant	Description
QScrollerProperties.Fps60	60 frames per second
QScrollerProperties.Fps30	30 frames per second
QScrollerProperties.Fps20	20 frames per second
QScrollerProperties.Standard	the default value is 60 frames per second (which corresponds to `QAbstractAnimation` ).

PySide6.QtWidgets.QScrollerProperties.ScrollMetric#

This enum contains the different scroll metric types. When not indicated otherwise the setScrollMetric function expects a QVariant of type qreal.

See the QScroller documentation for further details of the concepts behind the different values.

Constant

Description

QScrollerProperties.MousePressEventDelay

This is the time a mouse press event is delayed when starting a flick gesture in [s]. If the gesture is triggered within that time, no mouse press or release is sent to the scrolled object. If it triggers after that delay the delayed mouse press plus a faked release event at global position QPoint(-QWIDGETSIZE_MAX, -QWIDGETSIZE_MAX) is sent. If the gesture is canceled, then both the delayed mouse press plus the real release event are delivered.

QScrollerProperties.DragStartDistance

This is the minimum distance the touch or mouse point needs to be moved before the flick gesture is triggered in m.

QScrollerProperties.DragVelocitySmoothingFactor

A value that describes to which extent new drag velocities are included in the final scrolling velocity. This value should be in the range between 0 and 1. The lower the value, the more smoothing is applied to the dragging velocity.

QScrollerProperties.AxisLockThreshold

Restricts the movement to one axis if the movement is inside an angle around the axis. The threshold must be in the range 0 to 1.

QScrollerProperties.ScrollingCurve

The QEasingCurve used when decelerating the scrolling velocity after an user initiated flick. Please note that this is the easing curve for the positions, not the velocity: the default is OutQuad , which results in a linear decrease in velocity (1st derivative) and a constant deceleration (2nd derivative).

QScrollerProperties.DecelerationFactor

This factor influences how long it takes the scroller to decelerate to 0 velocity. The actual value depends on the chosen ScrollingCurve. For most types the value should be in the range from 0.1 to 2.0

QScrollerProperties.MinimumVelocity

The minimum velocity that is needed after ending the touch or releasing the mouse to start scrolling in m/s.

QScrollerProperties.MaximumVelocity

This is the maximum velocity that can be reached in m/s.

QScrollerProperties.MaximumClickThroughVelocity

This is the maximum allowed scroll speed for a click-through in m/s. This means that a click on a currently (slowly) scrolling object will not only stop the scrolling but the click event will also be delivered to the UI control. This is useful when using exponential-type scrolling curves.

QScrollerProperties.AcceleratingFlickMaximumTime

This is the maximum time in seconds that a flick gesture can take to be recognized as an accelerating flick. If set to zero no such gesture is detected. An “accelerating flick” is a flick gesture executed on an already scrolling object. In such cases the scrolling speed is multiplied by AcceleratingFlickSpeedupFactor in order to accelerate it.

QScrollerProperties.AcceleratingFlickSpeedupFactor

The current speed is multiplied by this number if an accelerating flick is detected. Should be >= 1.

QScrollerProperties.SnapPositionRatio

This is the distance that the user must drag the area between two snap points in order to snap it to the next position. 0.33 means that the scroll must only reach one third of the distance between two snap points to snap to the next one. The ratio must be between 0 and 1.

QScrollerProperties.SnapTime

This is the time factor for the scrolling curve. A lower value means that the scrolling will take longer. The scrolling distance is independent of this value.

QScrollerProperties.OvershootDragResistanceFactor

This value is the factor between the mouse dragging and the actual scroll area movement (during overshoot). The factor must be between 0 and 1.

QScrollerProperties.OvershootDragDistanceFactor

This is the maximum distance for overshoot movements while dragging. The actual overshoot distance is calculated by multiplying this value with the viewport size of the scrolled object. The factor must be between 0 and 1.

QScrollerProperties.OvershootScrollDistanceFactor

This is the maximum distance for overshoot movements while scrolling. The actual overshoot distance is calculated by multiplying this value with the viewport size of the scrolled object. The factor must be between 0 and 1.

QScrollerProperties.OvershootScrollTime

This is the time in seconds that is used to play the complete overshoot animation.

QScrollerProperties.HorizontalOvershootPolicy

This is the horizontal overshooting policy (see OvershootPolicy ).

QScrollerProperties.VerticalOvershootPolicy

This is the horizontal overshooting policy (see OvershootPolicy ).

QScrollerProperties.FrameRate

This is the frame rate which should be used while dragging or scrolling. QScroller uses a QAbstractAnimation timer internally to sync all scrolling operations to other animations that might be active at the same time. If the standard value of 60 frames per second is too fast, it can be lowered with this setting, while still being in-sync with QAbstractAnimation . Please note that only the values of the FrameRates enum are allowed here.

QScrollerProperties.ScrollMetricCount

This is always the last entry.

Constant	Description
QScrollerProperties.MousePressEventDelay	This is the time a mouse press event is delayed when starting a flick gesture in `[s]`. If the gesture is triggered within that time, no mouse press or release is sent to the scrolled object. If it triggers after that delay the delayed mouse press plus a faked release event at global position `QPoint(-QWIDGETSIZE_MAX, -QWIDGETSIZE_MAX)` is sent. If the gesture is canceled, then both the delayed mouse press plus the real release event are delivered.
QScrollerProperties.DragStartDistance	This is the minimum distance the touch or mouse point needs to be moved before the flick gesture is triggered in `m`.
QScrollerProperties.DragVelocitySmoothingFactor	A value that describes to which extent new drag velocities are included in the final scrolling velocity. This value should be in the range between `0` and `1`. The lower the value, the more smoothing is applied to the dragging velocity.
QScrollerProperties.AxisLockThreshold	Restricts the movement to one axis if the movement is inside an angle around the axis. The threshold must be in the range `0` to `1`.
QScrollerProperties.ScrollingCurve	The `QEasingCurve` used when decelerating the scrolling velocity after an user initiated flick. Please note that this is the easing curve for the positions, not the velocity: the default is `OutQuad` , which results in a linear decrease in velocity (1st derivative) and a constant deceleration (2nd derivative).
QScrollerProperties.DecelerationFactor	This factor influences how long it takes the scroller to decelerate to 0 velocity. The actual value depends on the chosen ScrollingCurve. For most types the value should be in the range from `0.1` to `2.0`
QScrollerProperties.MinimumVelocity	The minimum velocity that is needed after ending the touch or releasing the mouse to start scrolling in `m/s`.
QScrollerProperties.MaximumVelocity	This is the maximum velocity that can be reached in `m/s`.
QScrollerProperties.MaximumClickThroughVelocity	This is the maximum allowed scroll speed for a click-through in `m/s`. This means that a click on a currently (slowly) scrolling object will not only stop the scrolling but the click event will also be delivered to the UI control. This is useful when using exponential-type scrolling curves.
QScrollerProperties.AcceleratingFlickMaximumTime	This is the maximum time in `seconds` that a flick gesture can take to be recognized as an accelerating flick. If set to zero no such gesture is detected. An “accelerating flick” is a flick gesture executed on an already scrolling object. In such cases the scrolling speed is multiplied by AcceleratingFlickSpeedupFactor in order to accelerate it.
QScrollerProperties.AcceleratingFlickSpeedupFactor	The current speed is multiplied by this number if an accelerating flick is detected. Should be `>= 1`.
QScrollerProperties.SnapPositionRatio	This is the distance that the user must drag the area between two snap points in order to snap it to the next position. `0.33` means that the scroll must only reach one third of the distance between two snap points to snap to the next one. The ratio must be between `0` and `1`.
QScrollerProperties.SnapTime	This is the time factor for the scrolling curve. A lower value means that the scrolling will take longer. The scrolling distance is independent of this value.
QScrollerProperties.OvershootDragResistanceFactor	This value is the factor between the mouse dragging and the actual scroll area movement (during overshoot). The factor must be between `0` and `1`.
QScrollerProperties.OvershootDragDistanceFactor	This is the maximum distance for overshoot movements while dragging. The actual overshoot distance is calculated by multiplying this value with the viewport size of the scrolled object. The factor must be between `0` and `1`.
QScrollerProperties.OvershootScrollDistanceFactor	This is the maximum distance for overshoot movements while scrolling. The actual overshoot distance is calculated by multiplying this value with the viewport size of the scrolled object. The factor must be between `0` and `1`.
QScrollerProperties.OvershootScrollTime	This is the time in `seconds` that is used to play the complete overshoot animation.
QScrollerProperties.HorizontalOvershootPolicy	This is the horizontal overshooting policy (see `OvershootPolicy` ).
QScrollerProperties.VerticalOvershootPolicy	This is the horizontal overshooting policy (see `OvershootPolicy` ).
QScrollerProperties.FrameRate	This is the frame rate which should be used while dragging or scrolling. `QScroller` uses a `QAbstractAnimation` timer internally to sync all scrolling operations to other animations that might be active at the same time. If the standard value of 60 frames per second is too fast, it can be lowered with this setting, while still being in-sync with `QAbstractAnimation` . Please note that only the values of the `FrameRates` enum are allowed here.
QScrollerProperties.ScrollMetricCount	This is always the last entry.

PySide6.QtWidgets.QScrollerProperties.__ne__(sp)#

Parameters:: sp – PySide6.QtWidgets.QScrollerProperties
Return type:: bool

Returns true if these scroller properties are different from sp; otherwise returns false.

PySide6.QtWidgets.QScrollerProperties.__eq__(sp)#

Parameters:: sp – PySide6.QtWidgets.QScrollerProperties
Return type:: bool

Returns true if these scroller properties are equal to sp; otherwise returns false.

PySide6.QtWidgets.QScrollerProperties.scrollMetric(metric)#

Parameters:: metric – ScrollMetric
Return type:: object

Query the metric value of the scroller properties.

See also

setScrollMetric() ScrollMetric

static PySide6.QtWidgets.QScrollerProperties.setDefaultScrollerProperties(sp)#

Parameters:: sp – PySide6.QtWidgets.QScrollerProperties

Sets the scroller properties for all new QScrollerProperties objects to sp.

Use this function to override the platform default properties returned by the default constructor. If you only want to change the scroller properties of a single scroller, use setScrollerProperties()

Note

Calling this function will not change the content of already existing QScrollerProperties objects.